Need Help with Xecuter 2.6CE and Upgraded HDD

[Rheah38]

I'm a newbie but I just recently install a Xecuter 2.6CE Mod with Xapt3r solderless on a v1.6 Xbox everything went well (was able to flash the bios to 5032) but when I put in my 160GB HDD it Frags put in the retail HDD its ok. I took out the HDD from my other modded Xbox (Xecuter Lite 2.1 with 80GB HDD) into the v1.6 the same thing happens error code 06. Plz help


Xecuter 2.6CE Mod with Xapt3r
Xbox 1.6
5032 bios

 

[makaveli>the>don]

did u flash the bios with the new harddrive in? if not this why it's not workin, u must flash it and install evox or whatever with the new harddrive in,

 

[Rheah38]

It freezes up with the new HDD in itbefore it can be flashed

 

[makaveli>the>don]

Ok then it must be the boot settings, there should be some little switches at the base of the harddrive, i mean little, try changing these till it works.

 

[Fantmx]

makaveli is referring to the jumpers on the back of the hard drive. What type of drive is it? Try setting them to cable select. If that doesn't work and it is a Western Digital, try removing the jumper.