need help

No you don’t have to; you can rebuild the LPC with wires if you want. Or you can skip the entire rebuild and have a non-working mod. If you choose the latter, don’t blame the X3 when nothing works.
 

catogtp

VIP Member
Dec 26, 2003
248
0
Stock liteon, already have drive key.Need any additional HW?

Hi. I've a samsung ms28 spoofed as liteon and I've read that with LT+, spoofed drives won't be supported anymore.

So I bought a stock Liteon DG-16D2S 74850C and want to know how do I flash it. Do I need to do a full dump with additional H/W, like spears etc. or if I already have the drive key from my Samsung, is it simply enough to insert it into the firmware file and flash the liteon drive (no need for dumping)?
 

chuci

Senior Member
Nov 17, 2003
215
0
Re: Stock liteon, already have drive key.Need any additional

if the key is a liteofw or all the other files ie serial/dummie/key etc then you will beable to flash to a new liteon drive and it should work fine.
 

chuci

Senior Member
Nov 17, 2003
215
0
Re: Stock liteon, already have drive key.Need any additional

braveheart will beable to answer better, im sure he will reply.
 

catogtp

VIP Member
Dec 26, 2003
248
0
Re: Stock liteon, already have drive key.Need any additional

No, You guys haven't understood me. I don't have Liteon's OFW. In fact, I don't have any serial/key/dummy files etc. To get any of them, I need additional hardware and/or soldering. Don't want that. The only thing from liteon that I have right now is pure hardware - the disc reader itself ;) (the drive is taken from another console). And I know it's stock firmware.

What I've got, is my ms28 which has been to this time in my x360 and I have its CFW and key (it's ixtreme LT)

As the liteon comes from a different console, I have completely no interest in its drive key. I only want to be able to insert samsung's key to lt+ firmware and flash it.
 

debart

Loyal Member
Nov 2, 2003
265
0
Re: Stock liteon, already have drive key.Need any additional

People say spoofing isn't supported with LT and onward, but I was in the exact same position as you... My samsung was dead, so I flashed they key into a lite-on drive. The FW was just LT, and it seemed to work.. so..

Give it a try? You should be able to get the key from the samsung, and just flash LT+ for Lite-ons to the lite-on drive, spoofing the key in.
 

ReMix

Console Freak
Nov 4, 2003
3,138
0
Re: Stock liteon, already have drive key.Need any additional

you will not need any additional hardware

your original drive for that xbox is a lite-on, is it not?

if that is the case, just load up your samsung dump in the source tab.
this will display the drive key.

what type of lite-on the samsung is spoofed as will determine the LT+ you want to use for the lite-on flash.

if the original drive was a 7xxx drive, use 7xxx firmware loaded in the target slot.

once you have the target firmware manually loaded, just press "spoof to target"

now you will have lite-on firmware ready to flash with the correct key

next, erase the lite-on you have and flash
 

catogtp

VIP Member
Dec 26, 2003
248
0
Re: Stock liteon, already have drive key.Need any additional

Thanks a lot guys!

Yes, my original drive was a Liteon. I bought an X360 with a pre-spoofed sammy for a purpose - wanted to avoid the hassle of dumping liteon's firmware. It is much easier on samsung drives.

I will do all that you guys wrote tommorow. I need to read a lil' bit more about erasing and flashing in the Jungleflasher tutorial first :)
 

catogtp

VIP Member
Dec 26, 2003
248
0
Re: Stock liteon, already have drive key.Need any additional

I tried flashing the drive today, but no go. It may be dead, see here:

http://360mods.net/index.php?name=Forums&file=viewtopic&t=28063

Made a new topic because that's a completely different issue. The one this topic was about is already solved.