LITEON DG-16D4S - SLIM Need Help !

[nishat]

in jungle flasher 1.91 (usbpro-.18) no drive detected after trace cut(i have my dummy.bin) ,i used the sputnik360 switch !

 

[Martin C]

picture of your switch please.

 

[nishat]

i dont have a good camera,i checked the trace cut with digital meter!

 

[x360ccm]

put the switch to normal not unlock

 

[nishat]

i tried all but no unlock button on jf, btw- look at attachments !

 

[x360ccm]

press intro again

 

[Martin C]

Post your JF log.

 

[nishat]

intro working ,but same no unlock button...

m8 martin here what you want !

 

[Martin C]

I wanted you to attach your jf.log, not upload it to some ad-ridden site.

 

[nishat]

I wanted you to attach your jf.log, not upload it to some ad-ridden site.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

JungleFlasher 0.1.91 Beta (300)

Session Started Sun Feb 05 15:58:46 2012



This is a 32 bit process running on a 32 bit CPU

X360USB PRO detected, Version 0.18



Found 1 I/O Ports.

Found 16 Com Ports.

Found 4 windows drives C: D: E: F:

Found 1 CD/DVD drives F:



portio32.sys Driver Installed

portio32.sys Driver Started, thanks Schtrom !

PortIO unloaded.

Sending Vendor Intro to port 0x0000

Status 0x80

Re-sending Vendor Intro:

...........................................................

Serial flash found with Status 0x72



Sending Device ID request to port 0x0000

Spi Status: 0x9C

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name: MXIC(MX25L2005)

Flash Size: 262144 bytes

Loading firmware file C:\Users\GAURAV\Desktop\Dummy.bin

MD5 hash: bce6a41488ec053964de47dfe77b87d6

Inquiry string found

Identify string found

Drive key @ 0xA030 1xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Firmware Osig: [PLDS DG-16D4S 0225]

Firmware is: SlimKey Extract

Loading firmware file C:\Users\GAURAV\Desktop\LTPlus-0225-v3.0u.bin

MD5 hash: db5c70eaaabb53501c2c4f53dce9abfd

Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Firmware Osig: [PLDS DG-16D4S 0225]

Firmware is: LT-Plus 2.0

Spoofing Target

DVD Key copied to target

Key Sector copied from Source to Target

Target is LT - ID strings not copied to Target





Getting Status from port 0x0000

Serial flash found with Status 0x72

Reading Drive Key.

............

Stage 1 failed



Authorisation Failed!



Getting Status from port 0x0000

Invalid Status 0x80

Sending Vendor Intro to port 0x0000

Status 0x80

Re-sending Vendor Intro:

.......

Serial flash found with Status 0x72



Sending Device ID request to port 0x0000

Spi Status: 0x9C

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name: MXIC(MX25L2005)

Flash Size: 262144 bytes

sorry !

 

[Martin C]

With the switch set to normal, can you still get your dummy.bin as before?

 

[nishat]

can any mod please delete the dvd key,you know why i'm requesting you to do that !

---------- Post added at 16:26 ---------- Previous post was at 16:25 ----------

no,i'm not getting the dvd key now !

 

[Martin C]

so detecting the drive, clicking slimkey and selecting no doesn't work any more?

close up pics of what you've done then please.

 

[nishat]

so detecting the drive, clicking slimkey and selecting no doesn't work any more?

close up pics of what you've done then please.

i just get the drive in vendor mod,when i click ATA Reset ,it shows drive not detected !


sorry,i don't have a better camera !

 

[Martin C]

i just get the drive in vendor mod,when i click ATA Reset ,it shows drive not detected !


sorry,i don't have a better camera !

Did you read what I asked you do to and did you understand it?

GO THROUGH THE SAME STEPS AGAIN TO GET DUMMY.BIN.

 

[nishat]

Did you read what I asked you do to and did you understand it?

GO THROUGH THE SAME STEPS AGAIN TO GET DUMMY.BIN.

sorry but if simply connect the drive it shows drive not detected and if i press intro ,it gose to vendor mode,and don't getting out of this vendor mode,jf shows ................................................................................................................................................................................................................................

 

[Martin C]

so if your drive isn't detected, you need to work backwards. Desolder what you've done and repair the trace.

We cannot offer any more help until you post a pic of what you've done.

What camera do you have? It will have a macro zoom.