RGH Need j-runner to boot on the hacked nand

[junivelli]

Hi
Today i tried to installed a demon on a falcon RGH, however i have a litlle issue, its when i connect the power supply to the xbox the MiniUSB led of the demon turn on then turn off immediately, i can boot on the retail nand,to be able to boot on the hacked nand i need to connect the usb cable to my computer and run j runner and toggle the nand, to make it switch to the demon nand, then the led turn on, then i can disconnect the usb cable from my computer, and switch the nands by using the demon usb spy demon, once i unplugg the power supply from the console the issue comes back and i have to do the same thing once againe, is anyone had this issue before
Thanks

here a video and pics
[ame="http://www.youtube.com/watch?v=QwJ3uwK6c84"]Nand - YouTube[/ame]
https://www.dropbox.com/s/och2u9sl8ng0sl9/Photo 2012-11-29 10 18 40 AM.jpg
https://www.dropbox.com/s/5xfe7rl1mwb9f9p/Photo 2012-11-29 10 19 02 AM.jpg
https://www.dropbox.com/s/o01apr20t0qc8h7/Photo 2012-11-29 10 19 07 AM.jpg
https://www.dropbox.com/s/8bx8blbsf3yynjp/Photo 2012-11-29 10 19 36 AM.jpg
https://www.dropbox.com/s/lggn31pssbfyj4v/Photo 2012-11-29 10 24 27 AM.jpg

 

[BL4K3Y]

Can you explain what the issue is here?

I couldn't understand a word of what you posted (if English isn't your native language, I apologise for the ignorance).

 

[junivelli]

english is not my native language,
in few words, the Mini USB Led wont turn on, unless i use the j-runner

 

[junivelli]

problem solved