Ok Here Is The Scoop. I Sent My Xbox To Get Jtagged By A Member From A Different Site. Got Xbox Back And Everything Was Working Great. On Sunday I Wanted To Update So Avatar Would Show. So I Was Following the Guide On Team Fsd. Site. I Put My Usb Flash In And I Hit The Eject Button Due To There Was A Disc In It I Wanted To Get Out. And All I Got Was A Black Screen, I Never Updated Cause When The Xbox Turns On All I Have Is A Black Screen And No Audio Or Video. I Cant Get Xellous To Load Or Anything. I Sent A Couple Messages To Guy Who Did Jtag asking for help, And Of Course I Haven't Heard Back. Seeing I Don't Have Nand Dump Or Cpu Key, What Are My Options? I Did Pay For E-fuse Protection So That Should Be Good. I Have Very Little Solder Skills That's Why I Paid To Get It Jtagged. I Know This Is Total Noob, But Any Help Would Be Great, Thanks
JTAG Need Jtag Help!
- Thread starter crackerstokes
- Start date
Teajunkie
VIP Member
You really need to get back to the guy who jtagged it for you!
You will need the nand dump just incase anyway!
You will need the nand dump just incase anyway!
sick360mods
BANNED
xbobb
VIP Member
did the guy not send you a disk with the nand dumps, CPU key, Drive key etc ? every time i do one i always put these on disk and send to customer along with there console... get in touch with the modder
sick360mods
BANNED
I recieved just the console back, no disc, no email, nothing else
I have sent 3 emails since sunday looking for help, haven't heard anything yet.
I have sent 3 emails since sunday looking for help, haven't heard anything yet.
sick360mods
BANNED
Who did u send the console to so we no to tell everyone to stay clear unless he works everything out with you
Sent from my iPod touch using Tapatalk
Sent from my iPod touch using Tapatalk
M Azeem K, its a core no hdmi, only a/v cable
I have tried booting with eject, holding x with a controller plugged in back slot, booting with sync button held, with no hard drive, with disc drive out, with my stock hard drive, nothing I can do seems to help. so I dont know.
I have tried booting with eject, holding x with a controller plugged in back slot, booting with sync button held, with no hard drive, with disc drive out, with my stock hard drive, nothing I can do seems to help. so I dont know.
Wow, if you have the Core Edition of Xbox360 and it doesn't have HDMI, then it must be a Xenon. And Xenons, well, they have many problems, usually related to CPU or GPU. And from what you're telling, it seems like what has happened is that your Xbox360 is on its way to RROD...perhaps an E74.
Martin C
VIP Member
M AzeeM K, you think RROD, well I did ordered a couple Xecuter RROD 360 PRO Repair Kits 2 weeks ago for different consoles, when they show up I can throw one on.
Martin C, powers on, only a black screen, no audio, no videio, solid green light on console the center icon only
Martin C, powers on, only a black screen, no audio, no videio, solid green light on console the center icon only
Well I finally heard back from the guy who did my Jtag, I'm shipping it back to him to see what he can do. I'll let you know how it goes. thanks for the help
Martin C
VIP Member
Finally got my Jtag back, It's working for now. Modder thought it was a bad diode, so he replaced wires and diodes. Still did not boot, so he reflashed. Now it works. Any thoughts on RROD kit, I bought a kit while it was gone. Should I install kit before it rrod or wait or does it make a difference? I asked him for OG nand dump, and keys, but I got nothing back but console.
BGAMods
VIP Member
i wouldnt recommend removing a xenon from its case as that alone can cause rrod.
any decent modder would have gave you a copy of your nand files without you even asking.
any decent modder would have gave you a copy of your nand files without you even asking.
Martin C
VIP Member
I wouldn't even look at a xenon in a funny way
Yep, I send the original dump and CPU key for any that I do. They usually have them waiting for them before they get home