X360USB PRO Need some help flashing slims

[kharlisson]

Well i've been flashing phats for a very long time with old stuff on my laptop, VT6421A PCMCIA, express slot adapter, ck3 pro, probe 3 and molex power to power the drive. Well had a great friend of mines that owed me a favor, send me a x360usb pro v2 and ck3i. so now i want to start flashing slims, what else do i need now that i have a x360usb v2 and a ck3i. just asking for some help please. im off to work, thanx people. thanx to tx for making the best products.

 

[Farouk123456]

add me on msn and i'll explain to u
[email protected]

 

[Acton1]

Read the JF manual about flashing slim's mate it's all there what you need to know

 

[kharlisson]

thanx s much i'll add u to my yahoo IM. thanx

 

[Akilles]

Why would you need to add someone to msn if everything is covered in the tutorials section? just search and you'll find everything you need

Sent from my Galaxy Note using Tapatalk 2

 

[keil423]

Search for me on Youtube. I have a video guide for both the Sputnik probe and the Kamikazi hack.

Good luck

 

[daman10]

There are plenty of guides around just watch a few videos and read the guides on here

 

[Disk0]

Well i've been flashing phats for a very long time with old stuff on my laptop, VT6421A PCMCIA, express slot adapter, ck3 pro, probe 3 and molex power to power the drive. Well had a great friend of mines that owed me a favor, send me a x360usb pro v2 and ck3i. so now i want to start flashing slims, what else do i need now that i have a x360usb v2 and a ck3i. just asking for some help please. im off to work, thanx people. thanx to tx for making the best products.

There's no need to use both x360usb pro v2 and ck3i - the v2 has the ck3i incorporated into it

 

[jacobsharkey]

Waste getting the ck3i but anyhow you need a sputnik probe and a molex. However the probe is only going to work on mxic.

 

[pengekcs]

You will need to have a good, bit more powerful soldering iron (like 50w or a gas torch like iron) or a dremel to do the kamikaze mod to the drive of the slim's mediatek controller ic. I suggest you do some trials before you get down to actually do it on a real console. It can be easily messed up.

 

[guitarguy]

I use the Sputnik360 along with my CK3 and X360 USB Pro for MXIC slim drives. For the kamikaze hack I us the tip of a sharp Exacto knife to unlock the drive instead of a dremmel. The kamikaze hack is called that for a reason, it's easy to screw up so be patient.