Need some help on a direct connection to a 1.1

[Cydios]

here's the problem. I jacked up an install. My xbox is a V1.0. the routing wire on the board for the green wire has come clear off the board while sodering. this link here
http://www.teamxecuter.com/index.php?name=Forums&file=viewtopic&t=19136

shows how to hot wire it. Where does the green wire on the main wire harness directly connect to? I need to trace this little line to see where it exactly goes to so I can bypass it direct. Please help.

 

[schef]

Need Help Fixing Wired Controller.

I was changing the right joystick on my xbox wired controller. After i was done, i tested it and noticed that the character always looks down and i am not able to turn the camera up. I took is back apart and noticed that i removed two pads. I would like someone to help me find another location where i can connect the two points where the pads are missing. I will include pictures thank you.


In the attached picture you can see that the two pads are dark.

 

[TheMask]

Re: Need Help Fixing Wired Controller.

Well that looks like an afterglow controller. Since it's 3rd party not many people have much experience with those. Try looking into the more popular gamestop brand controller, they're almost identical. If you find a diagram to a gs controller, it will most likely work with the afterglow.