ANSWERED need some help on demon/slim proto v2??

[morinzo]

I'm not sure what section to put this in so I just posted it here, sorry if it's in the wrong section.

had a box brought back to me that the customer doesn't remember what the dash version was when he made the mistake and flashed the stock nand instead of the demon :crazy:, now I have the original dump from when I first modded the console from him.

The orig dump that I have is 16537.

1. How can I figure out the current stock dash version

2. If I have the original dump from when I modded it will this console be able to be used on live again

3. Should it still boot from the demon side

I have never had to deal with an issue like this so any help is greatly appreciated!!

 

[gavin_darkglide]

1. How can I figure out the current stock dash version.
It doesnt matter, as the CB Version hasnt changed. Just change the ldv on the nand dump you have now to what the fuses have set, and flash the 16537 image and update normally.

2. If I have the original dump from when I modded it will this console be able to be used on live again
YES

3. Should it still boot from the demon side
It depends, on if the customer wrote a bad image to the demon, or erased it, but as long as the soldering is good, the console should still boot from the demon side, as long as a good image is written to it.

 

[morinzo]

1. How can I figure out the current stock dash version.
It doesnt matter, as the CB Version hasnt changed. Just change the ldv on the nand dump you have now to what the fuses have set, and flash the 16537 image and update normally.

2. If I have the original dump from when I modded it will this console be able to be used on live again
YES

3. Should it still boot from the demon side
It depends, on if the customer wrote a bad image to the demon, or erased it, but as long as the soldering is good, the console should still boot from the demon side, as long as a good image is written to it.

TY Gavin, I got it working..