Need to know specs of caps near Hana chip

[boyam99]

After a quick Google search I found out that the capacitor I need is a 100uf 16V capacitor.
Is this the correct cap that will work with the small black capacitors near the scaler chip on the xbox 360 motherboard? I saw some cheap ones on amazon and ebay I could buy. I know I could buy a new system but this is my last ditch effort and if I fix it I can get max $30 for it if I sell it on ebay.

EDIT: I found out a website that sells these for .88 cent's


Any help?

 

[Cyke12]

Provided the replacement cap you are going to buy is identical to the one found near the (H)ANA chip, then it should work, provided it is soldered correctly, but from what I've read from your previous posts you've blasted your board with a heatgun, which is a very, VERY bad idea, no offense, but it doesn't do any good for the board itself.
if you want a reflow that can be done at home for next-to-nothing, cover the board in several layers of tinfoil minus the chip you're reflowing, and place it in the oven for about 8-10 mins at around 200 degrees celsius. Did this with a dead Xenon and it worked perfectly afterwards, no blown caps, no melted plastic, etc.
If it doesn't work out after further repair (cap, reflow), I'd sell the dead board on ebay for a few $$$, and go buy yourself a slim/trinity, those work beautifully, plus easy to RGH compared to Coronas.