New 2.0.13599.0 Dash Update FAQ ***READ***

Xecuter

Staff member
Top TX Brass
Dec 6, 2002
11,443
128
Asia
team-xecuter.com
New 2.0.13599.0 Dash Update Info:

1. When you update on Liteon DG-16D4S 9504/0272 drives - the spi flash will become locked (just like we told you they could). To do further fw updates you will require the Xecuter Unlocked PCB or you will have to use a sputnik switch or use the sputnik probe (if the spi is the MXIC brand), or the Kamikaze hack if it is the Winbond brand. The TX Unlocked PCB is obviously the best choice and works on ALL models of Liteon DG-16D4S Slim drive.

2. If you insist on updating we recommend as always that you revert to stock fw (OFW) or the update might fail or you may get banned ( Example Status Code: 335A - 351F - 1380 - 0703 - C000 - 0099 )

3. If you have a spoofed drive and you update - expect to be banned. We have been telling you not to spoof for over a year now, so tough tits.

4. 9504/0272 drives updated in 0225/0401 Xbox's were NOT locked. Another proof that the unlocked PCB works perfectly and that they dont update drives where the OSIG was a locked drive.

5. The new dash 13599 updates ap2.5 challenges (this was totally expected). All older rips of AP.25 games will have to be reburned.

IMPORTANT: If you are going to reply - do so with solid information i.e. Drive versions, which fw was on the drive before you updated, test results after you updated.

Please no stupid questions and loads of speculation crap - you will be banned without warning as it just kills quality discussion.
 
  • Like
Reactions: Dr Puce

andregandolff

Senior Member
Nov 24, 2010
142
0
Re: New 13599 Dash Update Info ***READ***

updating liteon 74850 right now. will edit post when it finishes downlading
 

JR365

Full Member
May 10, 2011
47
0
Canada
Re: New 13599 Dash Update Info ***READ***

Drives that were reflashed with LT.1.1 after the last update instead of waiting for LT 1.9 fail the update.
same as other spoofed drives

tested on a lite on spoofed as a 7 series liteon with 1.1
i believe you answered everything i needed to know fella! much appreciated... my drive is a hitachi 78 spoofed as a benq i believe on the january update
 

Discwizard70

Full Member
Apr 26, 2010
32
0
Cen Cal
Re: New 13599 Dash Update Info ***READ***

I have just updated a friend's Elite with Liteon 7 series in it. He had put LT+1.9 on it AFTER the previous update, but he did it wrong. He put the 1.9FW on it for Liteon 7's instead of using the 0251 after update firmware. So, as a result of him not reading the 1.9 instructions, he got the update error : code 335A-351F-1380-0703-C000-0099.
I easily remedied this for him by putting the 0251 FW on it, and it finished the update fine. He can play everything fine, with the exception of AP2.5 titles of course.


2 THINGS LEARNED HERE:

1. READ instructions included in FW releases for the love of GOD!!

2. While code 335A-351F-1380-0703-C000-0099 may be a flag for your console, it is certainly not a BAN! (Who knows what the future will bring for this console though)
 

nosherfj

VIP Member
Nov 1, 2010
1,105
0
Manchester UK
Re: New 13599 Dash Update Info ***READ***

will the forthcoming LT+1.9 for 9504/0272 drives be delayed now cus the new 0272 ofw is slightly different to the new 0272 ofw which the LT+1.9 is based upon?

I did update but luckily I got a pcb coming but if I had updated with the old 0272 ofw on the unlocked pcb (with write protect on) would the update have failed?
 

Iron5

VIP Member
Nov 24, 2010
279
0
PT
Re: New 13599 Dash Update Info ***READ***

So this means that if i get a TX made Pcb and put it on a 9504 drive it will work properly?

Does the original 9504 drive PCBs not yet update to this latest dash have the same capacity to lock and unlock like the TX made PCBs?

thanks
 

andregandolff

Senior Member
Nov 24, 2010
142
0
Re: New 13599 Dash Update Info ***READ***

updating liteon 74850 right now. will edit post when it finishes downlading
Liteon 74850/02150 with LT 1.9 straight to new update.

Tested out rainbow six vegas 2, Gears 1, Gears 2, and crysis 2, they all work fine.

Xval = Secdata is clean
 

Morpheuspt

VIP Member
Apr 20, 2011
318
0
Portugal
Re: New 13599 Dash Update Info ***READ***

So this means that if i get a TX made Pcb and put it on a 9504 drive it will work properly?
thanks
Yes.

I got a 0272, updated dash and as we know it was locked. Does not respond to Slim unlock, but an MTK intro works to read, as it should.

Ordered my PCB today, feeling happy.
 

had22

Full Member
Sep 24, 2010
57
0
Fl,USA
Re: New 13599 Dash Update Info ***READ***

thanks for the info, Oh well lil bit too late for me I when ahead and updated since I was on stock firmware, it was going happen sooner or later, I order my PCB kit today....
 

jay180016

Noob Account
Jan 25, 2011
8
0
El Paso, TX
Re: New 13599 Dash Update Info ***READ***

i updated my liteon 74850 W/O loading back the orig FW and it works fine, i didn't get any errors updating and as everyone else is saying the games with AP2.5 aren't working. Oh well i still have my originals :)... On another note i just got my unlocked PCB for my 0225 so i cant wait to load up the FW once it becomes available to us.
 

nosherfj

VIP Member
Nov 1, 2010
1,105
0
Manchester UK
Re: New 13599 Dash Update Info ***READ***

will the 0272 LT+1.9 have osig locked signature as am worried about putting it on the replacement pcb I got coming for my 9504/0272 drive? sorry if it's a stupid question.
 

bruzher

Junior Member
Mar 1, 2011
22
0
Re: New 13599 Dash Update Info ***READ***

So, there's no issue if i update the dash since i have a liteon series 9 (93450c, fat 360), right? Thanks in advance!
 

tr4ckerz

VIP Member
Aug 20, 2010
498
33
Re: New 13599 Dash Update Info ***READ***

Thanks Uber for this early warnings! Your early news are rarer than a gold!
 

Iron5

VIP Member
Nov 24, 2010
279
0
PT
Re: New 13599 Dash Update Info ***READ***

Yes.

I got a 0272, updated dash and as we know it was locked. Does not respond to Slim unlock, but an MTK intro works to read, as it should.

Ordered my PCB today, feeling happy.
* But what about the people that haven't yet update to 13599 dash on the 9504 drive?

Xecuter is telling people to not update and i think its the right choise,but does this mean that the 9504 PCBs not yet update have some kind of system that allows to unlock and lock the PCBs just like the the TX made PCBs?If so this will mean that on a future jf update you could lock the original 9504 PCBs make the 13599 update and them unlock it and put the new Cfw.?
 

mapleleafs89

Senior Member
Aug 28, 2010
105
0
Re: New 13599 Dash Update Info ***READ***

8. 0272/0225/0401 v1.9 LT+ FW is ready and will be released tonight. I wonder how many of you read down this far

YOU ARE AWESOME!
 

Cooperjs1

Full Member
Nov 23, 2010
90
0
Re: New 13599 Dash Update Info ***READ***

So, there's no issue if i update the dash since i have a liteon series 9 (93450c, fat 360), right? Thanks in advance!
Yep! Just flash back to stock first. Idk if it makes a difference, but I have read of people getting banned. I flashed mine back to stock first. Better safe than sorry, right?
 

Support Our Sponsors