ANSWERED New drive arrived, quick checkup before doing something.

[CrashanBurn]

Ok so i have a new drive for the busted 16D2S.

So to make this work on the xbox.
I have to use the dummy file from the broken drive?
Do i just load this dummy file and the latest LT+?
And follow the regular procedure of flashing, or do i need to do something different?

Anything to pay attention to, so i don't kill this PCB also.
Still cant understand what went wrong with the other one so i rather be a noob ask before messing up again.

The new drive came in a blank casing.
Should i just swap the internals to the other casing?
Since there is no label on it saying its a liteon 16D2S etc;...

 

[hersheys247]

No if it is a liteon casing u should be good,

Just open jf and get into vendor mode, write ur dummy.bin from ur previose dvd then vendor outro, till u see drive , should be all set


Sent from my brain tumor causing device using Tapatalk

 

[cab0747]

No if it is a liteon casing u should be good,

Just open jf and get into vendor mode, write ur dummy.bin from ur previose dvd then vendor outro, till u see drive , should be all set


Sent from my brain tumor causing device using Tapatalk

If you already have the most recent dash, go ahead and flash LT 3.0 using your Dummy.bin as the source FW and the proper LT 3.0 as your target FW.

If you need to update your dash, flash the drive using your Dummy.bin, put it in the console, install the most recent update, then flash the drive with LT 3.0

 

[CrashanBurn]

Yeah the console was already on 2.0.13599.0.
So i should be good with that.

So load dummy file from old drive.
Auto load of latest LT+
Intro/Device ID
Write
Outro / Ata reset

no need for erasing.

 

[hersheys247]

Write will erase


Sent from my brain tumor causing device using Tapatalk

 

[BL4K3Y]

So load dummy file from old drive.
Auto load of latest LT+
Intro/Device ID
Write
Outro / Ata reset

no need for erasing.

You don't Intro a Lite-On drive like you would other MTK-based drives (Samsung and BenQ), you use the Lite-On erase command to get your drive into Vendor mode (status 0x72).

 

[CrashanBurn]

Ah ok.
So its erase liteon
Write
Outro / Ata reset

after loading dummy from old drive and new LT+ file

Sidenote: Could it be i killed the PCB from the previous drive because i got a X360 USB Pro V5?
Just noticed the guide say i should not powercycle because X360 USB Pro V2 does this automatically.
And i did powercycle.
Even though JF still shows me the message to powercycle.

 

[hersheys247]

360pro does not power cycle drive, it just provides communication through port for ur dvd and computer, you meed a ck3 to power ur drive and when extracting key you need the ck3 probe to power cycle by pressing the button on probe


Sent from my brain tumor causing device using Tapatalk

 

[twisted247]

1. plug the drive up to pc
2. run jf app
3. load ur ofw/cfw with ur key spoofed
4. mtkflash select ur sata port click liton-erase
5. then click yes then yes again
6. then it will ask u to power cycle the drive do so quickly
7. u should now be in vendor mode ur chipset should show to the right and status 0x72.click write
when done outro the device if outro worked correctly the drive model and key verified will be to the left agian.

thats it works everytime. also when i say power cycle the drive i mean with ck3/ck3i or if using the 360 for power unplug the power from the drive then back in quickly

 

[CrashanBurn]

Ok, got it.
Hopefully nothing goes wrong this time.

Edit : Do i click "Spoof source to target" on Firmware tool 32 tab first?
Or is this for other drives.

 

[hersheys247]

Ok, got it.
Hopefully nothing goes wrong this time.

Edit : Do i click "Spoof source to target" on Firmware tool 32 tab first?
Or is this for other drives.

Yes, this. Copies ur ofw dvd to cfw


If i helped you in anyway, please press the THANKS and REP button


Sent from my brain tumor causing device using Tapatalk

 

[CrashanBurn]

Ok again.

1. Connect drive
2. Click Spoof source to target (with dummy from original drive, and latest LT+ loaded)
3. MTK Flash tab, lite-On erase to get into 0x72(have to power cycle as stated at popup).
4. Write
5. Outro/Ata reset

Sorry for repeating myself, but i rather ask a few times to many to be sure i got it right.
Never replaced a drive so ...

 

[twisted247]

yes load the dummy.bin in source and lt+ 3.0 to target. spoof to target save . lite-on erase cycle the power when asked 0x72 status then write after done outro till u see drive propertys to the left

 

[CrashanBurn]

When i got my dummy.bin loaded and the latest LT+ loaded.
And then click Spoof source to target i get this.

Target rev is LT 02510C, serial info not copied

 

[FlashDrive360]

When i got my dummy.bin loaded and the latest LT+ loaded.
And then click Spoof source to target i get this.

Target rev is LT 02510C, serial info not copied

that message is fine continue to proceed as told earlier and all will be fine

 

[twisted247]

correct continue that info is not needed as the fw differ after the 13146 dash xgd3 support.
neway just continue. good luck

 

[CrashanBurn]

Ok working again.

Thanks all for the help.

Still breaking my head on how that previous drive got broken.

 

[hersheys247]

Ok working again.

Thanks all for the help.

Still breaking my head on how that previous drive got broken.

Didnt research enough like u did this one


If i helped you in anyway, please press the THANKS and REP button

Sent from my brain tumor causing device using Tapatalk