New HDD Problem

krzykiller9

Full Member
Mar 6, 2006
42
0
I got my 120GB fully customized HDD today. I plugged it in, and it stayed in the X2CL screen. It said I could just plug it in and play. What do I do. HELP PLEASE!!
 

krzykiller9

Full Member
Mar 6, 2006
42
0
I doesnt load discs. The disc normally works, but it doesnt load it.
 

krzykiller9

Full Member
Mar 6, 2006
42
0
Also I get error 7 when the chip is off, and it doesnt load a BIOS.
 

krzykiller9

Full Member
Mar 6, 2006
42
0
I did and I got the same thing. Error 7, and now Xbox logo boot thing when chip is on.
 

seriouslysilly

Full Member
Dec 15, 2003
51
0
krzykiller9 said:
Also I get error 7 when the chip is off, and it doesnt load a BIOS.
if the HD is unlocked and you boot with the chip disabled, the error should be 5 or 6.

does your dvd drive eject? i've had one with a bad dvd and giving me error 7 before. hope u didn't short out the dvd and could just be the hd connections
 

krzykiller9

Full Member
Mar 6, 2006
42
0
Well, I put my old HDD in, and everything worked fine. My DVD drive is fine. When I lock or unlock my HDD, w/ the cip off, I still get error 7. My DVD drive can still read discs and open. Nothing is wrong w/ that. In the FlashBIOS screen it says:
Drive 161: Not Detected
ATA 48-Bit LBA Supported
HDD: SAMSUNG SPI203N TL100-24 120.00GB

Unable to read HDD first sector getting partition table.

That is all below the FlashBIOS title and under the for help link. HELP!!! What the fudge is wrong!!?!??!!?!¿¿!!!?!?!11one!!!!
 

krzykiller9

Full Member
Mar 6, 2006
42
0
Also, all of the connections are fine, READ POST ABOVE /\
||
||
 

krzykiller9

Full Member
Mar 6, 2006
42
0
Help please. Also read my last post on the 1st page. HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELLLLLLLLLLLLLLLLLLLLLPPPPPPPPPPPPPPPPP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 

Fantmx

VIP Member
Feb 15, 2004
2,274
0
Set the jumper to be cable select. Error 7 is an HDD timeout, it has absolutely nothing to do with the drive being unlocked or locked.