RGH New JR JRP 2 doesn't find device in J-Runner v0.3 Beta (7) Program

[clr1121]

Just got the new CR4 XL and JRP 2 and trying to perform a RGH2.
http://www.modchipcentral.com/store/Xecuter-CR4-XL-RGH/JTAG-SLIM-and-PHAT-USA-Canada.html

Problem:
Cannot detect the console in order to extract the Nand

Specs:
Xbox 360 Phat RGH.
Soldered the JRP 2 with good connections.
JRP 2 light stays on red.
Xbox power supply plugged in with the standby power.

J-Runner shows the JRP 2 saying:

"J-Runner v0.3 Beta (7) Started


Checking Files
Finished Checking Files


Bootloader Attached
Bootloader Version: 1.0.5
Checking Console..
Device Not Found.
Can not continue"

 

[jsinger47]

Your JRP is in bootloader mode. Make sure the switch is away from JP-BL.

If it remains in bootloader mode after switching back, reprogram the firmware .hex available in JR.

 

[clr1121]

Hey dude. It went to green after the flash. Now it says in Device Manager J-R Programmer and the driver is not installed. Is the driver in JR folder as well?

 

[BL4K3Y]

Hey dude. It went to green after the flash. Now it says in Device Manager J-R Programmer and the driver is not installed. Is the driver in JR folder as well?

You can find device drivers for the NAND-X and JRP in the "common\drivers" folder.