new problem

bobness

Full Member
Nov 17, 2004
36
0
d**kinson
when i try to put my bios useing http it says halt invalid flash...so i checked the flash protect on the chip..it was in the off position...so then i checked the switches and it was off....so what is my problem?
 

ThaCrip

VIP Member
Aug 18, 2004
756
0
USA
1MB Bank
Bank 1234: on on off off (Set to this when flashing first time with FlashBIOS)

and use the "X3.1959" bios file ... i did HTTP method 2 times and it flashed perfect everytime.
 

drewsky

Junior Member
Jun 27, 2003
11
0
spoofing liteon to ms25

ive got a brand new jasper 360 arcade with a lite on 93450c.
i would like to replace the lite on with my old ms25 that i spoofed earlier for a hitachi 360.
Could somebody suggest me a good and quick guide.

thank you

:wink:
 

EvilC0rp

Console Master
Nov 16, 2003
1,696
0
EvilInc.Net
Re: spoofing liteon to ms25

well first off you will need to get they key of the liteOn, and when u are already at that stage why not flash the LiteOn with LT as the drive is better than the samsung....

Makes more sense to me
 

nuker_the_globe

Full Member
Dec 27, 2003
44
0
Re: spoofing liteon to ms25

The point is that you have to get the key from the LiteOn. Since it's a 93450c, you have to open it up, clean the CB, cut traces, solder, etc...

PROJECT2806 is right. LT is out for the LiteOn, and not for the Sammy. You have a LiteOn, and you NEED the key to mod anyway. Once you have the key from the LiteOn, you're 90% there. Just repair the cuts, flash the Liteon with LT, and play happily with your Live-safe console!