Newbie first rgh2 on Trinity

tayouija

Junior Member
Jul 10, 2010
11
1
FIRST and foremost I must say thanks you to this Awsome website. I have learned alot in these last few day.
So this is my first glitch system trinity on 16202 with a cr3 lite and although i had some success I have had a lot more failure. I preformed a whole rgh on the system following this tut.http://www.youtube.com/watch?v=v0KLg5ZdRHo.:redface: This tut was was awesome. i had a few problems and when i did i googled them found a form on here and resolved it quick. The main problem was about the ecc being grayed out in j-runner and i found the solution quick here in a form(http://team-xecuter.com/forums/showthread.php/100650-Create-ECC-greyed-out-in-J-Runner) so it was cool, wrote the ECC, glitched the system, got the cpu key and finished up. After wrighting nand i removed the nand x wires put the system together and turned it on and nothing. I mean the green light was blinking but no glitch. Per the instruction in the video i should be glitching. I had the setting on the cr3 lite set up just like he show me with the jumpers L4 1+2 and all those setting set and plus i glitch like 5 times when i was getting the cpu key fast too.:mad2: So i said F*** it ill just take it out and put the DGX v1.1 chip in i had bought. I was doomed from go. Looking at the v1.1 chip no hook up for my nand x. So Im like F*** it. REMOVED the hook up from the cr3 lite and said ill just use the diagram from this from http://team-xecuter.com/new-team-xecuter-rgx-timing-files-guides-faq/ to solder the wires on to program it an while doing so pulled a whole contact pad off. (The one by c25 that has the light blue wire on it):facepalm: So now i have 2 screwed up chips and no glitched system. On the bright side i do have a good nand i know through all the reading i had done everyone said make sure you have a good nand. IDK at this point i guess ill order a new DGX chip V1.0 though :crazy: or another cr chip maybe a rev c and try again.

On a side note this whole experience got me thinking about a saying that I read somewhere, "Make it idiot proof and they will make a better idiot.":(
 

joona2134

VIP Member
Jan 31, 2011
268
0
Walsall, UK
Get a rev c or 3pro will boot like a trooper mate!
 
  • Like
Reactions: tayouija
FIRST and foremost I must say thanks you to this Awsome website. I have learned alot in these last few day.
So this is my first glitch system trinity on 16202 with a cr3 lite and although i had some success I have had a lot more failure. I preformed a whole rgh on the system following this tut.http://www.youtube.com/watch?v=v0KLg5ZdRHo.:redface: This tut was was awesome. i had a few problems and when i did i googled them found a form on here and resolved it quick. The main problem was about the ecc being grayed out in j-runner and i found the solution quick here in a form(http://team-xecuter.com/forums/showthread.php/100650-Create-ECC-greyed-out-in-J-Runner) so it was cool, wrote the ECC, glitched the system, got the cpu key and finished up. After wrighting nand i removed the nand x wires put the system together and turned it on and nothing. I mean the green light was blinking but no glitch. Per the instruction in the video i should be glitching. I had the setting on the cr3 lite set up just like he show me with the jumpers L4 1+2 and all those setting set and plus i glitch like 5 times when i was getting the cpu key fast too.:mad2: So i said F*** it ill just take it out and put the DGX v1.1 chip in i had bought. I was doomed from go. Looking at the v1.1 chip no hook up for my nand x. So Im like F*** it. REMOVED the hook up from the cr3 lite and said ill just use the diagram from this from http://team-xecuter.com/new-team-xecuter-rgx-timing-files-guides-faq/ to solder the wires on to program it an while doing so pulled a whole contact pad off. (The one by c25 that has the light blue wire on it):facepalm: So now i have 2 screwed up chips and no glitched system. On the bright side i do have a good nand i know through all the reading i had done everyone said make sure you have a good nand. IDK at this point i guess ill order a new DGX chip V1.0 though :crazy: or another cr chip maybe a rev c and try again.

On a side note this whole experience got me thinking about a saying that I read somewhere, "Make it idiot proof and they will make a better idiot.":(

Where re u located mate? I could sort this pain in the a*s for u : )
 
  • Like
Reactions: tayouija

tayouija

Junior Member
Jul 10, 2010
11
1
I also would like to know based on the info provided is there anything i could have done different. (best setting for cr3 lite, best way to update dgx 1.1 chip,ect.) All feedback (even the Bulls***) is very much appreciated. I didn't get any feedback so I'm assuming i did everything right. (other than ripping the contact pad off the dgx chip)
 

tayouija

Junior Member
Jul 10, 2010
11
1
Happy to post that I got a CR rev c and installed it and it Glitches great. So this trinity is all good to go!:cool2: