No boot on glitch side after M$ update

[AudioProUK]

Ok so I got it online last night and did the update . Everything on the M$ side works great

Now however the CR wont glitch .

I redumped the new M$ nand and made a new gitch image from that , no joy . The wiring is fine as it was running fine before the update .

It now gives me RROD 0022 after 20 - 30 secs ( its nothing to do with the console it`s self ! )

any help would be great

 

[Gears123]

Demon I presume is iinstalled?
If so stock nand works but demon giitch nand dosnt work?

 

[JohnsonMighty]

http://www.team-xecuter.com/forums/showthread.php?t=77634

Add one LDV Value to the glitched nand and reflash.

 

[Martin C]

As long as you use the latest version of J-Runner to build, you won't need to change the LDV.

 

[Gears123]

Look for martins c thread called ldvs and why they are so important

Edit: that was quick martin lol

 

[AudioProUK]

I made a new ECC image and now the coolrunner light comes on and stays on it`s all a little weird

Yes the retail side is working fine
The CR doesnt flash and gives 0022 after 30 secs .

I`ll try building another image but i think it`ll do the same . I`m using j-runner . Will check for an updated version I think i`ve got the latest though

---------- Post added at 11:32 ---------- Previous post was at 11:27 ----------

yeah same thing . No green light on CR no boot on demon side at all

 

[AudioProUK]

I think i`ve found the issue ,

* XOR HACK NEEDED FOR CB 6754
File C:\Users\avid\Desktop\xbox\J-Runner v02 (278) Core Pack\common\CB\CB_B.6754.bin not found!
Failed to open CB_B.6754.bin

What do I have to do with this ?

---------- Post added at 11:48 ---------- Previous post was at 11:43 ----------

looks like Microsoft changed the CB on me and messed me up ....

 

[Gears123]

Just use original nand dump to create glitch image then change ldv to the latest m§ nand dump ldv value and then update with jrunner to latest dash and then write it

 

[AudioProUK]

sorry mate i`m getting confused .

Can you explain how to do that in a bit more detail . I`m looking at the output in j-runner and there are like 3 different LDV values ...

cheers

 

[manwithoutname]

Haven't you guys figured from Martin's post that LDV makes no difference with the glitched image anymore so long you use latest version of J-Runner!

Please post your J-Runner log and also make sure your uptodate by pressing F12 on J-Runner.

 

[AudioProUK]

Thanks MWNN , Thats why i was confused .

I`m going to start again . The log is full of crap now .
Also i`m using RGH 1 does that matter .

 

[manwithoutname]

If it's a Slim then it doesn't matter whether you use RGH1 or RGH2, if it's a phat then it certainely will. You can only use dual NAND on phats with RGH2 (meaning you also need RGH2 wiring installed).

Thanks MWNN , Thats why i was confused .

I`m going to start again . The log is full of crap now .
Also i`m using RGH 1 does that matter .

 

[AudioProUK]

OK i`ll have to change the wiring and do it RGH2 . It was working fine with RGH 1 before I updated tough . I`ll switch the wring and get back to you .

Cheers

 

[manwithoutname]

You answered your problem there mate. Since it was on RGH1 it was on single CB but since you accepted the MS update it changed to dual CB hence why the stock NAND worked fine but the RGH side didn't.

Re-wire to RGH2.0, create image and flash before reporting back and best of luck.

 

[AudioProUK]

ok ive re wired , and created image etc .

heres the dump :

===================================================
09 September 2012 12:34:47

J-Runner v0.2 Beta (280) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Current: DemoN
Switching to XBOX
Success
Programming Coolrunner
C:\Users\avid\Desktop\xbox\J-Runner v02 (278) Core Pack\common\xsvf\RGH2_A_en.xsvf
sending xsvf to demon...
Done
Reading Nand to C:\Users\avid\Desktop\xbox\J-Runner v02 (278) Core Pack\output\nanddump1.bin
XBOX360
Hardware : Demon Phat
Firmware : 1.0
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Reading Nand
Done!
in 0:23 min:sec

Reading Nand to C:\Users\avid\Desktop\xbox\J-Runner v02 (278) Core Pack\output\nanddump2.bin
Initializing Nand..
Reading Nand
Nand Initialization Finished
Done!
in 0:22 min:sec

Comparing...
Nands are the same
Initializing Nand..
CpuKey is Correct
Key already Exists
Nand Initialization Finished
Load Files Initiliazation Finished
15574
Started Creation of the 15574 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.04.515
---------------------------------------------------------------
building glitch2 image
---------------------------------------------------------------
C:\Users\avid\Desktop\xbox\J-Runner v02 (278) Core Pack\372050493505\updflash.bin image built, info:
---------------------------------------------------------------
Console : Jasper
NAND size : 16MiB
Build : Glitch (v2)
Xell : power on console with console eject button
Serial : 372050493505
ConsoleId : 022284995168
MoboSerial: 7056459127009355
Mfg Date : 08/28/2009
CPU Key : 78****************************F8
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : 0A****************************CC
CF LDV : 4
KV type : type2 (hashed)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------

Saved to C:\Users\avid\Desktop\xbox\J-Runner v02 (278) Core Pack\372050493505
Image is Ready
Current: XBOX
Switching to DemoN
Success
DEMON
Hardware : Demon Phat
Firmware : 1.0
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Writing Nand
Done!
in 0:27 min:sec

now the console comes on . The ROL center light flashes ones then it powers down .

 

[manwithoutname]

Try flashing the cool runner with different timing files while ticking the demon option every time.

 

[AudioProUK]

Programming Coolrunner
C:\Users\avid\Desktop\xbox\J-Runner v02 (278) Core Pack\common\xsvf\RGH2_B_en.xsvf
sending xsvf to demon...
Done
Programming Coolrunner
C:\Users\avid\Desktop\xbox\J-Runner v02 (278) Core Pack\common\xsvf\RGH2_C_en.xsvf
sending xsvf to demon...
Done
Programming Coolrunner
C:\Users\avid\Desktop\xbox\J-Runner v02 (278) Core Pack\common\xsvf\RGH2_D_en.xsvf
sending xsvf to demon...
Done

Same thing every time . Could it be the jumpers on the CR ?

 

[manwithoutname]

If your using cool runner rev c you need to set the jumpers to RGH2.0 config.

 

[AudioProUK]

I`ve just noticed that the CAP next to the resistor I removed is missing (jp resistor) ... there should be 2 there is only one on this . also when i removed he resistor the pad on the right as we are looking at the pic above came with it .

For RGH1 neither of these issues seemed to matter . Just thought i`ll ask if you thoguht it might be that

 

[manwithoutname]

Can you post pictures of your actual coolrunner? In general the jp point has to be open but you can use either 2-3 or 3-4 setups on the 2nd jumper.

Also to eliminate any issues with the demon, dump the stock nand and flash it to the demon. If console boots stock dash then your demon install is fine.