No boot on glitch side after M$ update

[AudioProUK]

I`ve got no way of taking pics which sucks . ive tried the open , 1 2 . 2 3 configs on the second jumper . and the jp one is open . Will flash the stock nand now .


---------- Post added at 13:18 ---------- Previous post was at 13:17 ----------

stock nand booted fine with the CR turned off (prog) but not with the CR turned on ...

 

[manwithoutname]

It won't boot with the CR on cause , that's normal. So did you try all the timing files from A to D with jumper 1-2 connected and jp open? Also the lay out of your wires is very important specially the CPU reset one.

 

[AudioProUK]

just got my neighbour to take a pic of the CR ,

I took it out and cleand it up a little bit and i`m going to re-wire the whole thing and see where it takes me . You can see the missing cap

 

[AudioProUK]

All done , thanks heaps for your help . It was the RGH2 wiring , I had points e and f the wrong side of the +5v wire .

Thanks mate !!

 

[manwithoutname]

Anytime bud.

 

[AudioProUK]

it looks like i`ve jumped the gun a little bit .

Its glitching now nicely, still no boot tho.

I`ve tried all 4 timing files .

I`ve written an ecc file as thats prolly easier to to use for diagnostics . it just sits and glitches , i`ve tried 1 2 , and 2 3 config on the CR to no avail and i`e tried both with and without the cap jumper closed (it`s a SB jasper)

---------- Post added at 14:56 ---------- Previous post was at 14:49 ----------

also , whats this mean . Some times I get it some times it`ll make the image

* unpacking flash image, ....
ECC'ed - will unecc.
UnECC'ed
* found decrypted CD
* found XeLL binary, must be linked to 0x1c000000
* we found the following parts:
SMC: 2.3
CB_A: 6754
CB_B: 6754
CD (image): 6754
CD (decrypted): 9452
* checking required versions...
ok
* patching SMC...
Patching Jasper version 2.3 SMC at offset 0x12BA
* Replacing CD...

* XOR HACK NEEDED FOR CB 6754
File C:\Users\avid\Desktop\xbox\J-Runner v02 (278) Core Pack\common\CB\CB_B.6754.bin not found!
Failed to open CB_B.6754.bin

 

[Martin C]

Build a 14719 retail image with your CPU key and use that to create an RGH2 ECC file.

 

[AudioProUK]

will do !

---------- Post added at 15:26 ---------- Previous post was at 15:23 ----------

grrr ....sorry martin can you tell me how mate . Do i use my nand dump ?

 

[Martin C]

Use your stock NAND dump from your console (any version, doesn't matter).

Insert the CPU key.

Select 14719 and retail.

Select Create Image.

Click Re-Init

Click Create ECC.

 

[AudioProUK]

yeah thats what i thought , I`ve done that , now it`s glitching ok but giving me 3 reds and 0022 . this console is a pain in the butt lol .

 

[AudioProUK]

I`ve disconnected the cap jumper and its not 0022 now just sits and glitches forever

 

[Dicko316]

He would need to +1 to the ldv before creating the 14719 as he said he updated already.

 

[AudioProUK]

you dont need to with the latest j-runner

 

[marsey]

You go to the expense of installing a demon/CR on a console which for all intentions is going to be used by your client on XBL (your history is known) yet you leave the largest portion of cpu key and full dvd key on display for all to see

 

[AudioProUK]

thats for the heads up

P.s. it`s my xbox

 

[AudioProUK]

well i dunno . I`ve tried every conceivable configuration . Wont work for me . Think i`ll get another coolrunner in there and see what happens

 

[manwithoutname]

Back from the park after the Mrs demands to go there. Could really do with pictures of the whole install and CR wires layout bud.

---------- Post added at 17:03 ---------- Previous post was at 17:02 ----------

What possibily could someone do with those 2 without the actual NAND.

You go to the expense of installing a demon/CR on a console which for all intentions is going to be used by your client on XBL (your history is known) yet you leave the largest portion of cpu key and full dvd key on display for all to see

 

[marsey]

The "someone" is M.S

P.s. it`s my xbox

yeah i bet!!

 

[marsey]

The CR will be good unless you actually done something wrong physically with it yer prob lies with image/xsf/wiring
hence reason i have said to peeps in past get the console glitchting good first then install the demon ; and yes i know you had it glitching but if you had done yer homework then you should have known it needed to be rgh2 and the nand updated to 14719 before attempting to install demon

 

[AudioProUK]

get lost Idiot , it IS my xbox . I no longer do them for anyone else (except my daughters). This is the first time i`ve used he demon and my FRIENDS here know i`m genuine so bite me moron !

@ mwnn I`ll have another go tomorrow mate i`ve got to take my daughter to pick up some speakers , how i`m going to get them on he bike is beyone me but duty calls ..lol .