I flash my xbox with the FlashBIOS v 3.0.3 and no changes occur. I checked everything i can't get it to work. Please someone help. Please tell me even if i'm doing something completely obviously stupid. Thanks
No changes when i restart
- Thread starter BuffKindaGuy
- Start date
your flashing flashbios back to your x3...u need to get a hacked bios like 2914 (please don't ask for it here)..it uses illegal code so is difficult to find..try xbins..
and try this tutorial if u have never used mirc b4
http://www.xbox-scene.com/articles/xbins.php
and try this tutorial if u have never used mirc b4
http://www.xbox-scene.com/articles/xbins.php
you need to use the flashbios to flash your box with an xecuter bios. All the flashbios does is let you flash your bios, it's one of those clever marketing games.
I have that EVOX one build 3935. But, What do i do to put it on my xbox? Just put that bios through the http thing?
I would reccomend using the X3 2914 BIOS but sure Evox will work, and ya just upload "whateverthebiosiscalled.bin" into the HTTP thing.
If I am correct you want to flash your 3.0.3 flashbios down to 3.0.1. If this is the case you need to use the the X2 Bios Manager v2.3 from teamxecuter here:
http://www.teamxecuter.com/index.php?name=Downloads&d_op=viewdownloaddetails&lid=14
then you need to make a bios the size fo the bank you are flashing. If it is one of the main banks 1024KB, backup 256KB. You can do that by loading the bios into number of banks needed. The bank size is indicated in the banks and there are some pictures in this tutorial from teamxecuter:
http://www.teamxecuter.com/x2prog/
Save the bios and then flash the bios bank and it you should be good.
http://www.teamxecuter.com/index.php?name=Downloads&d_op=viewdownloaddetails&lid=14
then you need to make a bios the size fo the bank you are flashing. If it is one of the main banks 1024KB, backup 256KB. You can do that by loading the bios into number of banks needed. The bank size is indicated in the banks and there are some pictures in this tutorial from teamxecuter:
http://www.teamxecuter.com/x2prog/
Save the bios and then flash the bios bank and it you should be good.
Last edited:
pikapben said:
NO!! why would you flash your working flashbios with another flashbios...if he has a 1.6b then he's screwed if it gets reflashed with 3.01 ...
the chip is supplied with 3.03 in one bank & 3.01 in the other bank.
if it boots to a flashbios..then flash it with a full x3 bios..
if for some bizzare reason u want a flashbios on the other bank then u can do it from x3 config live...
jonrees69
VIP Member
WOW! A little testy! I guess I mess read the post. I got it backwards....if you have 3.0.1 and want to go to 3.0.3 you can do the same thing, but actually use the 3.0.3 instead.
Last edited: