No Controlers will conect

[vinces_xbox]

So I did my first Jtag.
I used the LTP port on my old xp computer.
It took some time but I got it done.

My problem is now that i have everything installed I cant conect any controlers wired or wireless.

Secondly the hard drive in the xp just took a dump so now i cant flash back to org nand.
also I read somewhere I could put the org nand on a usb and turn the 360 on with the eject button and it would somehow install something and fix this. But when I went to turn the xp computer on the hard drive was done!!

Is there any way to fix this?? OR I read that ....
I can check some of the other dead mother boards i have and if one of them is jtagable is there a way to use this nand on the good board?

Thanks to all that spent the time to read about my newest excursion!!

 

[manwithoutname]

If you're 100% certain you can't recover your original NAND then try this first. Re-dump your NAND with the current flash on it and then you can:

a) re-flash and see if it works

b) try to use the re-dump to re-create freeboot

If non of the above works then you will need a donor nand, you can try and extract your rawkv.bin & rawconfig.bin files and inject them to the donor nand or if you can't then you will have to use the donor nand as a whole.

It would helped more if you stated what type of motherboard you got and if HDMI which method you used to install the JTAG wiring.

 

[vinces_xbox]

If you're 100% certain you can't recover your original NAND then try this first. Re-dump your NAND with the current flash on it and then you can:

a) re-flash and see if it works

b) try to use the re-dump to re-create freeboot

If non of the above works then you will need a donor nand, you can try and extract your rawkv.bin & rawconfig.bin files and inject them to the donor nand or if you can't then you will have to use the donor nand as a whole.

It would helped more if you stated what type of motherboard you got and if HDMI which method you used to install the JTAG wiring.

Ok I will have the info next time I get on the forums. Thanks for the fsat response!!

Thanked!!!!!!!

 

[Martin C]

I really want to see pics as I already have an inkling where the problem is...

 

[explorer66]

it could be a faulty rf board, the same thing was happening to me on a xbox i had.
either try a diffrent 1 or if you soldered a wire to the rf board check it's not touching anything else on the rf board.
good luck

 

[vinces_xbox]

If you're 100% certain you can't recover your original NAND then try this first. Re-dump your NAND with the current flash on it and then you can:

a) re-flash and see if it works

b) try to use the re-dump to re-create freeboot

If non of the above works then you will need a donor nand, you can try and extract your rawkv.bin & rawconfig.bin files and inject them to the donor nand or if you can't then you will have to use the donor nand as a whole.

It would helped more if you stated what type of motherboard you got and if HDMI which method you used to install the JTAG wiring.

Ok so its a Falcon ... I think
All falcons have HDMI
I have attached a youtube link of the jtag wireing.

[ame]http://www.youtube.com/watch?v=tPTasLkVAkg[/ame]

 

[manwithoutname]

The wiring looks fairly good, but you might want try this and see if it eliminates the problem.

 

[keil423]

How about a pic of your alt. point for the rf board.

 

[vinces_xbox]

How about a pic of your alt. point for the rf board.

This is the method I used. I would rather not remove the board from the frame again.

Less RROD chance

 

[Martin C]

Did you think we just wanted to see a video of where your cables are?

It's possible that during the work you've carried out that something has been bridged/broken, therefore pics are needed.

BTW - it was me who changed your sig. You're not allowed to advertise in your sig without an approved trader ad, so please remove (and your Avatar).