FIXED No Debug Light

[antisober552]

Hey Guys So I Rgh A Console And Had It Booting But The Boot Times Was Nasty So I Tried To Improve The Boot Time By Shortening The CPU-RST Wire But After I tried To Power The Console On I Got No Debug Light And The Fan Sounds Like Its Constantly Resetting Its Self Ill Add Pictures Below And Hopfully Someone May Be Able To Help Me With This

I Thought I Might Of Bridged An Connection But Ive Looked All Over And Found Nothing

Console - Trinity
Dashboard - 16203
Flashed With JR Programmer V1
CoolRunner Rev C

Any other info needed just ask

Pictures

 

[Utmad]

Does it boot if put the stock nand back and turn the coolrunner to prg.

 

[antisober552]

what im doing now ill let you know the result

 

[antisober552]

Ive loaded the stock nand to the xbox and got red dot error code 0032

 

[nofeloniesyet]

in the pic the cr is in program mode,so it wont do anything,flip it to normal.also very possible you have broken cpu rst,this would throw 0032. check for continuance.

 

[antisober552]

in the pic the cr is in program mode,so it wont do anything,flip it to normal.also very possible you have broken cpu rst,this would throw 0032. check for continuance.

I know But the nand is stock when powered on the xbox gives me error 0032

 

[antisober552]

is there an alternative CPU-RST Point ?

 

[john mathews]

is there an alternative CPU-RST Point ?

yes under xclamp C5R11

 

[antisober552]

could you point me to a picture ?

 

[nofeloniesyet]

could you point me to a picture ?

c5r11 will do you no good until you repair cpu rst.

 

[antisober552]

So Next Question how can i repair the CPU-RST ?

 

[nofeloniesyet]

run a wire from r4d4 (topside) right side of resistor,and back to c5r11 pad and see if it boots stock,then you know thats ur issue.

 

[antisober552]

okai thanks ill let you know the result

 

[antisober552]

okai thanks ill let you know the result

You're A Top Man Now I Need To Make This Repair A Lot Better

 

[nofeloniesyet]

You're A Top Man Now I Need To Make This Repair A Lot Better

what i do on these,is wire my coolrunner cpurst wire wrap my repair wire round it and solder em both to c5r11,then ur set.no need for thanks......send more hookers

 

[antisober552]

okai so now thats fixed ive still got really bad boot times sometimes no boot at all:/ also need another alternative F Point on the cool runner

 

[BL4K3Y]

okai so now thats fixed ive still got really bad boot times sometimes no boot at all:/ also need another alternative F Point on the cool runner

You will probably find it more difficult to tweak now that you have that repair in place, but it can be done.

Just remember to be very careful when moving the CPU_RST wire around or you will undo your repair and possibly cause more damage (lifted/damaged traces are much harder to repair).

The alternate points for the CoolRunner pads have already been mapped out (the alternate points for "F" are marked in brown):



I don't know who owns the original image, so credits go to an anonymous uploader lol.

 

[antisober552]

Sorry Thx For The Picture Is The F Point The Brown Colour ?

 

[BL4K3Y]

Sorry Thx For The Picture Is The F Point The Brown Colour ?

Yes.

You can solder to the R3 solder pad or the IC leg (go for the solder pad if you don't feel confident going for the IC leg).

 

[antisober552]

Thanks To Everyone That Has Helped Me Tonight I Have Managed To Get the Console Booting within 6 cycles ( Not As Quick As My Other 3 Consoles ) But it works i just have one more console to do but no glitch chips :/ if anyone has any please feel free to drop me a price with location