No Drive Detected (I Screwed Up) Help!

B

bzowk

Full Member
Nov 2, 2004
42
0
Tennessee
Hey All -

Being rather stubborn and impatient, I tried to flash my drive today for the first time (first for me.) Previously, it was on LT 2.0 which someone else did.

I have a Samsung 28 and Xecuter X360USB PRO, but no power source so even though risky, I choose to use Xbox's power.

Here's what I did:
1. Hooked up drive to power of Xbox (Xbox only had power hooked up)
2. plugged X360USB into drive, then computer (drivers already installed on Win7 x64)
3. Ran JungleFlasher as Admin
4. Went to MTK Flash 32 Tab
5. Made sure the I/O Port was set to 0x000
6. Clicked Sammy Unlock - Drive displayed as Vendor Mode
7. Read Firmware & Saved it
8. Saved key in .bin
9. Saved read flash, too
10. AutoLoaded FW when prompted
11. Clicked Write

It started Erasing, then got an error. Found out the Xbox automatically powered off during process!!!

Now, I plug everything up (after power cycling everything but computer) and enter JungleFlasher. The X360USB & correct FW is shown, but drive says: No Drive Detected.

Note: I noticed the X360USB flashing blue while initially having trouble.

Thanks for any help / suggestions!

What can I do!?!?!
 
D

DLORDXD

VIP Member
Dec 5, 2011
204
0
Nothing,
We do not support ANY KIND OF USE of xbox 360 power supply as it is VERY UNSTABLE thus came CK3I/CK3 MINI. You will be lucky if anyone even tries helping you as this to be honest is just an overkill.
 
  • Like
Reactions: bzowk
B

bzowk

Full Member
Nov 2, 2004
42
0
Tennessee
Well, I now agree. I guess you live and learn. :)

Here's the status if anyone wishes to suggest any methods to try...

I followed the directions in the link for troubleshooting - however - could not get the drive to eject either manually nor when hooked up properly to the Xbox, itself.

When I run the "Intro / Device ID" followed by the immediate reseat of power (I do the power immediatly after clicking Yes on the confirmation window), I do get "Device in Vendor Mode." From there, though, it's not stable.

I can usually Read existing firmware when in this mode, but cannot Erase / Write. When I try to do so, it takes a while - then will say it's Invalid. When I try to "Unlock Sammy," it says Failed on Stage 1.

So... any more ideas?...Please!
 
B

bzowk

Full Member
Nov 2, 2004
42
0
Tennessee
Thanks -

OK - I tried what everyone's suggested and am still having an issue. If I can get one thing corrected, I think I'll be good, though. Here's what's up.

1. I loaded JungleFlasher (newest), then plugged in the drive's data via USBPRO and power via XBOX (Yes, I just ordered a CK3).

2. The USBPRO showed up, but not the drive. I clicked on Init, unplugged the drive's power, clicked yes to confirm, then immediatly plug the power back into drive.

3. The drive is now detected and in Vendor Mode. (See screenshot)

4. I select my original firmware (which I dumped from the drive initially), then the stock firmware as the target, then spoof the key. (See screenshot)

5. Back on the other tab, I click Write. It starts writing (as you can see in screenshot) but always results in Write Failed! This is what started the bricking in the first place. Maybe a bad or wrong firmware?!?

Note: During this time, the power from the XBOX to the drive was uninterrupted.

So - with the screenshots & log, can anyone tell if I'm leaving something out / doing something wrong? Perhaps I'm mixing up which firmwares go where.

Log:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

JungleFlasher 0.1.91 Beta (300)

Session Started Fri Jan 20 18:09:21 2012
This is a Wow 64 process running on 2 x 64 bit CPUs
X360USB PRO detected, Version 0.18
Found 1 I/O Ports.
Found 1 Com Ports.
Found 9 windows drives C: D: E: F: G: H: I: J: L:
Found 2 CD/DVD drives H: J:
Sending Vendor Intro to port 0x0000
Status 0x80
Re-sending Vendor Intro:
......
Parallel flash found with Status 0x70
Sending Device ID request to port 0x0000
Manufacturer ID: 0xBF
Device ID: 0xB6
Flash Name: SST(SST39SF020)
Flash Size: 262144 bytes
Loading firmware file D:\DrivesOldFirmware\SAM-OFW.bin
MD5 hash: 1c94d7d524def4281fd9ca90fb0f94d9
Inquiry string found
Identify string found
Drive key @ 0x406E 2B700294011D9691DCC853F8721B6CF6
Firmware Osig: [TSSTcorpDVD-ROM TS-H943Ams28]
Spoofed As: [HL-DT-STDVD-ROM GDR3120L0036]
Firmware is: LT v2.0
Loading firmware file D:\StockFirmware\SAM_OFW.bin
MD5 hash: e4b000f492df6b88406aad2ec3d705be
Inquiry string found
Identify string found
Drive key @ 0x4140 00000000000000000000000000000000
Firmware Osig: [TSSTcorpDVD-ROM TS-H943Ams28]
Firmware is: Stock
Spoofing Target
DVD Key copied to target
Inquiry string copied to Target
Identify string copied to Target
Getting Status from port 0x0000
Invalid Status 0x0
Sending Vendor Intro to port 0x0000
Status 0x80
Re-sending Vendor Intro:
......
Parallel flash found with Status 0x70
Sending Device ID request to port 0x0000
Manufacturer ID: 0xBF
Device ID: 0xB6
Flash Name: SST(SST39SF020)
Flash Size: 262144 bytes
Getting Status from port 0x0000
Parallel flash found with Status 0x70
Writing target buffer to flash
Sending Chip Erase request to port 0x0000
Erasing:............
Writing Bank 0: ................
Writing Bank 1: .......Write Failed!
 
knowlzy10

knowlzy10

BANNED
Sep 11, 2010
1,348
0
workington, cumbria, england
looks like a spoofed drive to me
there

Firmware Osig: [TSSTcorpDVD-ROM TS-H943Ams28]
Spoofed As: [HL-DT-STDVD-ROM GDR3120L0036]

ty chris gotta keep eye on the ball even after a few tins:)
 
Last edited:
B

bzowk

Full Member
Nov 2, 2004
42
0
Tennessee
Thanks -

So... spoofed or not, does that mean I do anything differently or anything else you suggest I try?

Thanks!
 
You must log in or register to reply here.