No Drive Detected!!

Suzy Age 4

Full Member
Jan 21, 2004
68
0
ok so i bought a spare lite-on dvd drive for my back-ups and ive flashed it before and i do have the key (dummy) i was having problems with xbc so i decided to re-flash it to see if it would fix the problem but the thing is that JF says no drive detected i open drive halfway before starting JF AND refresh but still no luck i also tick NON-IDE and still nothing im not sure what im doing wrong can somebody help please

btw im using 360usb pro and ck3
 

coolpowell

Full Member
Jan 30, 2004
72
0
You don't need to use tray half open. If using the USB pro then tick USB ports only and it'll be on the first port there 0x0000. If it still does not show, do a liteon erase and power cycle it to kick it to show flash properties then reflash to whatever you're trying to do, 0800 I assume.


Sent from my iPhone 4S using Tapatalk
 

Suzy Age 4

Full Member
Jan 21, 2004
68
0
under Drive Properties it says:
Vendor: ST9160310AS
Name:
F/W Rev: 0303
Reserved: 5SV4JNPF
DVD Key:
wtf thats not my drive and also nothing in JF is highlighted for me to click please help
 

coolpowell

Full Member
Jan 30, 2004
72
0
Make sure the update switch on the pro is in the off position otherwise JF won't see the drive. Disconnect any other drive to your computer as well to limit what shows. You should be able to tick the little box above I/O port to USB only and have 0x0000 show the drive connected with the pro.


Sent from my iPhone 4S using Tapatalk