LITEON 74850 no green light probe 2

[jpoy808]

trying to probe r707 no green light on probe 2 100 percent never been read completely stock possible probe is faulty, how to check

 

[BL4K3Y]

Forget R707, you no longer need to probe that point. Get a PMT conversion cable and follow the JungleFlasher tutorial for the PhatKey method (it involves probing MPX01).

 

[jpoy808]

ok I installed a switch across the 3.3v line on the probe, I'am able to switch probe on and off with the switch, what settings are for the probe 2

 

[BL4K3Y]

Open JungleFlasher, click PhatKey, click Yes, flick switch OFF, probe MPX01, flick switch ON, remove probe, flick switch OFF, count to 5, flick switch ON, click OK.

 

[jpoy808]

setting for the probe 2 mra or probe, which side to use red pin or green pin, and swicth up or down

 

[BL4K3Y]

Set it to probe and I think you use the pin labelled green (Serial).

 

[jpoy808]

does drive need to be half open

 

[BL4K3Y]

There is no need for half tray anymore, leave it closed.

 

[jpoy808]

awesome you were right got the key flashed thank you