RGH No startup/power on Stock with and after removing Demon

[Jos Dekker]

Type: Corona V5 – Xbox 360 E
Slim proto
Dashboard: 16537
Issue: No startup/power up on Stock after removing Demon

I installed the Slim proto and everything was running good. I decided to install a Demon with the Demon Corona V2 adapter and installed the Demon. I wrote the nandflash.bin and ofcourse the stock nand stays stock.
After the installation i started up the Xbox but nothing happening, no beep and no sign of power at all. When pushing the controller the light of the Xbox 360 controller blinks and then go out quick.
I removed the whole installation and put the Xbox back to fully stock, the same problem occurs that there is no sign of life, the xbox won’t beep, the fan is not starting up, nothing at all.
I’m pretty sure that i didn’t lifted any pads or whatever. Also i checked all solder points to find out if something was making a short but could not discover anything.
I hope anybody has a clue what could happened and how to fix this because i'm out of options at the moment.

I included some photos from the Xbox how it is at the moment. I don’t have photo’s of the Demon installation because everthing is back to stock now. Thanks Jos

http://www.jtagrgh.nl/1.jpg
http://www.jtagrgh.nl/2.jpg
http://www.jtagrgh.nl/3.jpg

 

[Jos Dekker]

Today i read the nand with result only 250 read errors, writing the original nand goes good. Bridge connections are made and checked. I think its the end of the show and something happeing to the nand that i can not explain or figure out.
Maybe someone got a suggestion what i could try?

 

[XDK]

I suggest u follow the proper template for help and post pics of the demon ect installed

 

[Jos Dekker]

I suggest u follow the proper template for help and post pics of the demon ect installed

Thank you for your contribution. As you proberly didn't read there are no photo's of the installation because everything is stock.

 

[Nadles]

If it was fine at RGH and wouldn't start after installing the Demon, I think you should have taken pictures of the install before ripping it out and hoping it would work again. There should be pictures of that because that's the initial problem.

 

[BL4K3Y]

As you proberly didn't read there are no photo's of the installation because everything is stock.

You didn't complete the template properly.

Where is your J-Runner log?

 

[XDK]

Thank you for your contribution. As you proberly didn't read there are no photo's of the installation because everything is stock.

oh I understand perfectly all was fine till u installed the demon then your vagina got sand in it and put it back to stock then came here to ask for support.. fill out the support template or get no help..

 

[BrockThunderjam]

I would suggest at the least try to wire back up and write the stock nand back and post your JR log. Would help try to figure out what's going on.

 

[Antalpromille]

You should realy follow the rules and fill out the template but heres some thoughts:
If you cant read/write the nand and the console just turn itself of directly after powering on i would check it for shorts on any voltage.

 

[Jos Dekker]

You should realy follow the rules and fill out the template but heres some thoughts:
If you cant read/write the nand and the console just turn itself of directly after powering on i would check it for shorts on any voltage.

Yes, will complete the template tomorrow. Happy new year!

 

[Antalpromille]

Yes, will complete the template tomorrow. Happy new year!

Do that. Happy new yers to you too!

 

[Jos Dekker]

TX Product(s) used: Slim Proto, Demon Slim, Postfix adapter, Corona V2 adapter
Console Type: Corona V5 – Xbox 360 E.
NAND size: 16GB
Dashboard version: 2.0.16537
CB version: 13182
Screenshot of NAND details from J-Runner:

J-Runner log: Link
Nandflash log: Link
Image of Coolrunner & Images of close-up soldering to motherboard:


Picture 01
Picture 02
Picture 03
Picture 04
Picture 05
Picture 06
Picture 07
Picture 08
Picture 09
Picture 10

More detailed pictures needed from parts, let me know.

Description of problem:
No startup/power up on Stock after removing Demon

I installed the Slim proto and everything was running good. I decided to install a Demon with the Demon Corona V2 adapter and installed the Demon. I wrote the nandflash.bin and ofcourse the stock nand stays stock.
After the installation i started up the Xbox but nothing happening, no beep and no sign of power at all. When pushing the controller the light of the Xbox 360 controller blinks and then go out quick.
I’m pretty sure that i didn’t lifted any pads or whatever. Also i checked all solder points to find out if something was making a short but could not discover anything.
I hope anybody has a clue what could happened and how to fix this because i'm out of options at the moment.

Thanks Jos

http://www.jtagrgh.nl/1.jpg
http://www.jtagrgh.nl/2.jpg
http://www.jtagrgh.nl/3.jpg

Was the console working before you started: Yes

 

[Jos Dekker]

The proto and the demon are back installed. Reading and writing the original nand are going good without read errors.

 

[Antalpromille]

The proto and the demon are back installed. Reading and writing the original nand are going good without read errors.

Perhaps you somehow blew your southbridge? Or burned some of its nececary voltages.

 

[Jos Dekker]

Hi, yes something happened but i can not find the cause exactly. When soldering i'm pretty accurate.

 

[TGKohler]

I'm having the same exact problem except on a Trinity. Anyone got any theories?

 

[BL4K3Y]

I'm having the same exact problem except on a Trinity. Anyone got any theories?

Since that is your first post, I am going to assume you have just read the forum rules (I am referring to rule #5 - NO THREAD HI-JACKING).

Start your own thread and complete the relevant template.