Ok so i switched the eeprom and not it will not work the display also starts red then turns blue but no video during this whole process. I can boot to the backup so this leads me to think that it has to bee in the board any help would be good thanks
No Video After eeprom change
- Thread starter vtec236
- Start date
Martin C
VIP Member
Sorry these are both NTSC eeproms and one came off a 1.4 and the other a 1.6 i got the 1.6 to work on the 1.4 but not the other way around
Martin C
VIP Member
Not a good idea to mix versions like this.vtec236 said:
There are tools like LiveInfo which allow you to edit an EEPROM, changing the Xbox version in it.
You're going to need to reprogram the EEPROM now - are you able to restore it?
Martin
The only thing i can really do is boot to the back-up bios so that i get the flashbios screen when i try to start the box it starts the x3 in red then after 15-20 secs turns blue but during this there is no video
if you can send me both eeproms I can make a linux bios that will install the new bios and fix you version and video info. Just pm if you need it, also the way it would work is you set the x3 to 256bios load and flash this bios on to the xbox and the eeprom that has been embedded will install on to the xbox. This program has helped so many ppl but I can't take responsibility for anything that happens but I dout your problem can get any worse. If you are intrested pm me and I will send you the info you need and I will find a site for the program I use so that you can read more about it.