My friends 360 (non modded) retail will turn on, you get the green lights on the console, then one light for the controller sync. BUT their is no sound or video? What would be the fix 4 this?
yea,xenon motherboard.they were the most common with this issue.usually when thier only experiencing this issue a reflow would do just fine ime.The manufacturer date is 3-31-06 and it only has the AV connector so I can't test using HDMI.
Once I can get 'er back together enuf to boot while holding the sync button I'll report back.
how does this also fix no sound?could possibly be incorrect video settings on the xbox itself
To reset the display settings of the Xbox 360 console to the default settings, follow these steps:
- Remove any discs from the disc tray.
- Turn the console off.
- Turn the console on. Note If you are using an Xbox 360 Wireless Controller, turn the console on by using the Xbox Guide button on the controller. Make sure that you use the player 1 controller when you do this. The player 1 controller will have the upper-left quadrant light illuminated.
- As the console starts, press and hold the Y button, and then pull the right trigger at the same time.
- The Xbox Dashboard resets the display settings to the default settings, and then automatically restarts the console.
try this
Wow, you really have no clue at all do you?could possibly be incorrect video settings on the xbox itself
To reset the display settings of the Xbox 360 console to the default settings, follow these steps:
- Remove any discs from the disc tray.
- Turn the console off.
- Turn the console on. Note If you are using an Xbox 360 Wireless Controller, turn the console on by using the Xbox Guide button on the controller. Make sure that you use the player 1 controller when you do this. The player 1 controller will have the upper-left quadrant light illuminated.
- As the console starts, press and hold the Y button, and then pull the right trigger at the same time.
- The Xbox Dashboard resets the display settings to the default settings, and then automatically restarts the console.
try this
Is there a fix for this as I have a corona v3 that is like this?you could try clearing cache by turning it on while holding sync on the front of console i believe.most likley needs a reflow/reball though.seen plenty over the years that green light but no video.reflow or reball almost every time.have also seen the hdmi portion of the video stop working while the rca will work fine,check for this too,might also play with the monitor discovery settings if you can ever get video back.
The repair kit just temporarily masks the problem. It is not a "fix". The problem will come back.Don't listen to frayed he's a xenon hater...just get yourself a TX Extreme Edition III Repair Kit...it will solve your video/audio issue...just fixed my friend's Falcon this morning...had the exact same problem...now both analog and digital outputs are working...funny thing is I've actually come across more Zephyrs and Falcons w/ that problem than Xenons.
That's not true...it all depends on the extent of the damage that's been done and what error it is.The repair kit just temporarily masks the problem. It is not a "fix". The problem will come back.
Most of us are since they're worth nothing and are prone to fail sooner or later (most likely sooner).Don't listen to frayed he's a xenon hater...
Well if they told you that the car wasn't worth the repair would you still pay them to to fix it?Everybody knows xenons are crap and have the highest failure rate...the guy was looking for a fix not someone telling him to throw his console in the garbage...it would be like me going to the mechanic and him telling me..."you're car is a piece of sh*t, why don't you drive it in the pond and buy a new one!" This is suppose to be a help/support forum...remember?
^^^^And the rrod kit does not help, no x-clamp replacement does repair a broken solder joint. You may think so, I did once also but I know better now.