FIXED No xell even after full boot R-JTAG

F

forewheeler

Junior Member
Oct 31, 2011
23
3
California
Jasper
Nand-512 mb
Dashboard-16203
CB-6754
Nand Details.png
Code: 
Version: 10Power Up
Waiting for POST to change
Post 09 
Post 01 
Post FD 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 14 - FSB_CONFIG_TX_CREDITS 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 14 - FSB_CONFIG_TX_CREDITS 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 2F - RELOCATE 
Post 2E - HWINIT 
Post 31 - FETCH_HEADER_4BL_CD 
Post 33 - FETCH_CONTENTS_4BL_CD 
Post 34 - HMACSHA_COMPUTE_4BL_CD 
Post 35 - RC4_INITIALIZE_4BL_CD 
Post 36 - RC4_DECRYPT_4BL_CD 
Post 37 - SHA_COMPUTE_4BL_CD 
Post 3A - BRANCH 
Post 40 - Entrypoint of CD reached 
Post 42 - FETCH_HEADER 
Post 44 - FETCH_CONTENTS 
Post 45 - HMACSHA_COMPUTE 
Post 46 - RC4_INITIALIZE 
Post 47 - RC4_DECRYPT 
Post 40 - Entrypoint of CD reached 
Post 41 - VERIFY_OFFSET 
Post 43 - VERIFY_HEADER 
Post 46 - RC4_INITIALIZE 
Post 47 - RC4_DECRYPT 
Post 50 - LOAD_UPDATE_1 
Post 52 - BRANCH 
Post 58 - INIT_HYPERVISOR 
Post 59 - INIT_SOC_MMIO 
Post 5A - INIT_XEX_TRAINING 
Post 60 - INIT_KERNEL 
Post 61 - INIT_HAL_PHASE_0 
Post 63 - INIT_KERNEL_DEBUGGER 
Post 64 - INIT_MEMORY_MANAGER 
Post 65 - INIT_STACKS 
Post 66 - INIT_OBJECT_SYSTEM 
Post 67 - INIT_PHASE1_THREAD 
Post 68 - Started phase 1 Initialization + INIT_PROCESSORS 
Post 69 - INIT_KEY_VAULT 
Post 6A - INIT_HAL_PHASE_1 
Post 6B - INIT_SFC_DRIVER 
Post 6C - INIT_SECURITY 
Post 6D - INIT_KEY_EX_VAULT 
Post 6E - INIT_SETTINGS 
Post 6F - INIT_POWER_MODE 
Most Fails(cumulative): 0xA0
Shutdown
photo (1).JPGphoto (2).jpgphoto.JPGUntitled.png

I'm having a hell of a time with this console and retrieving the CPU key. From what I can tell from Rater I get full post yet no Xell via lan or video port. I've tried bridging 1.2, 1.8,
and leaving the chip open. I've ran through all the dips on each settings to the best of my knowledge. Tried 0/330/470/off on the Jtag alt board. I normally get away with trolling the forums and figuring out the problem myself, this one however has me stumped! Console works great when I rewrite the stock nand.

Help is much appreciated!
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
F

forewheeler

Junior Member
Oct 31, 2011
23
3
California
I've removed the demon and R-Jtag setup and put it on another Jasper BB system I had. Console is working flawlessly with a 9.3 rater score! I'm going to order another Setup and try this console again in a few days, once I've regained some patience. Just wanted to update anyone who cares in the mean time. Thanks for the replies and the great hardware TX.
 
trippy86

trippy86

VIP Member
Nov 30, 2011
597
33
London
www.youtube.com
try the cpu_rst point on the topside of the board rather than the underside. I have used this tip 4 times now on troublesome consoles and every time it has worked for me
 
B

Bubba Lewey

Noob Account
Aug 17, 2013
2
0
I have the same problem. I show a full boot with Rater but no ROL and no XELL, no video, no RROD, no E79. I can reload the nand with the stock firmware and it boots just fine. I have searched hard to see if someone else has ran into this but this is the only other post I have seen. I have installed a few of these and have NOT ran into this before. Forewheeler, did you get this box to work with R-TAG?
 
Taijigamer2

Taijigamer2

VIP Member
Jun 8, 2013
1,292
0
England
RF1911 said:
If it stops at 6F you all have an issue with jtag wiring.
Click to expand...
Beat me to it :smile:

6E is not a true boot. U need to get to 79 LOAD XAM for full boot. Rater considers it a full boot but it's not. Please post jtag wiring pics.
 
Last edited:
B

Bubba Lewey

Noob Account
Aug 17, 2013
2
0
It was a JTAG related problem. We missed the AUD check box when we built the NAND and it wouldn't boot. Soldered jumper to bypass the AUD clamp on the JTAG QSB and it booted just fine. Thanks for your help!
 
  • Like
Reactions: Taijigamer2
N

Nicpoe

Noob Account
Sep 29, 2012
5
0
Same Problem here with 16mb Jasper. Full boot with Rater but no xell, no video. Disconnected JR Programmer, it stops glitching, but no video and no ROD.

Here's the Log:

Code: 
Slim Selected
Version: 10
Power Up
Waiting for POST to change
Post 40 - Entrypoint of CD reached 
Post C0 
Post E0 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post F4 
Post FC 
Post FE 
Post FD 
Post F5 
Post F4 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post E0 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 80 
Post 40 - Entrypoint of CD reached 
Post C0 
Post E0 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post F4 
Post FC 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post FD 
Post F8 
Post F8 
Post F8 
Post F8 
Post F8 
Post F9 
Post F8 
Post F8 
Post F8 
Post F8 
Post F8 
Post F8 
Post F8 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 14 - FSB_CONFIG_TX_CREDITS 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 2F - RELOCATE 
Post 2E - HWINIT 
Post 33 - FETCH_CONTENTS_4BL_CD 
Post 34 - HMACSHA_COMPUTE_4BL_CD 
Post 35 - RC4_INITIALIZE_4BL_CD 
Post 36 - RC4_DECRYPT_4BL_CD 
Post 37 - SHA_COMPUTE_4BL_CD 
Post 3A - BRANCH 
Post 40 - Entrypoint of CD reached 
Post 43 - VERIFY_HEADER 
Post 44 - FETCH_CONTENTS 
Post 45 - HMACSHA_COMPUTE 
Post 46 - RC4_INITIALIZE 
Post 47 - RC4_DECRYPT 
Post 48 - SHA_COMPUTE 
Post 4B - LZX_EXPAND 
Post 4E - FETCH_OFFSET_6BL_CF 
Post 4F - VERIFY_OFFSET_6BL_CF 
Post 50 - LOAD_UPDATE_1 
Post 52 - BRANCH 
Post 58 - INIT_HYPERVISOR 
Post 59 - INIT_SOC_MMIO 
Post 5A - INIT_XEX_TRAINING 
Post 61 - INIT_HAL_PHASE_0 
Post 63 - INIT_KERNEL_DEBUGGER 
Post 64 - INIT_MEMORY_MANAGER 
Post 65 - INIT_STACKS 
Post 66 - INIT_OBJECT_SYSTEM 
Post 67 - INIT_PHASE1_THREAD 
Post 68 - Started phase 1 Initialization + INIT_PROCESSORS 
Post 69 - INIT_KEY_VAULT 
Post 6A - INIT_HAL_PHASE_1 
Post 6B - INIT_SFC_DRIVER 
Post 6C - INIT_SECURITY 
Post 6D - INIT_KEY_EX_VAULT 
Post 6E - INIT_SETTINGS 
Post 6F - INIT_POWER_MODE 
Post 70 - INIT_VIDEO_DRIVER 
Post 71 - INIT_AUDIO_DRIVER 
Post 73 - INIT_SATA_DRIVER 
Post 76 - INIT_SYSTEM_ROOT 
Post 77 - INIT_OTHER_DRIVERS 
Post 78 - INIT_STFS_DRIVER 
Post 79 - LOAD_XAM 
Shutdown
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
Nicpoe said:
Same Problem here with 16mb Jasper. Full boot with Rater but no xell, no video. Disconnected JR Programmer, it stops glitching, but no video and no ROD.

Here's the Log:

Code: 
Slim Selected
Version: 10
Power Up
Waiting for POST to change
Post 40 - Entrypoint of CD reached 
Post C0 
Post E0 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post F4 
Post FC 
Post FE 
Post FD 
Post F5 
Post F4 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post E0 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 80 
Post 40 - Entrypoint of CD reached 
Post C0 
Post E0 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post F4 
Post FC 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post FD 
Post F8 
Post F8 
Post F8 
Post F8 
Post F8 
Post F9 
Post F8 
Post F8 
Post F8 
Post F8 
Post F8 
Post F8 
Post F8 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 14 - FSB_CONFIG_TX_CREDITS 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 2F - RELOCATE 
Post 2E - HWINIT 
Post 33 - FETCH_CONTENTS_4BL_CD 
Post 34 - HMACSHA_COMPUTE_4BL_CD 
Post 35 - RC4_INITIALIZE_4BL_CD 
Post 36 - RC4_DECRYPT_4BL_CD 
Post 37 - SHA_COMPUTE_4BL_CD 
Post 3A - BRANCH 
Post 40 - Entrypoint of CD reached 
Post 43 - VERIFY_HEADER 
Post 44 - FETCH_CONTENTS 
Post 45 - HMACSHA_COMPUTE 
Post 46 - RC4_INITIALIZE 
Post 47 - RC4_DECRYPT 
Post 48 - SHA_COMPUTE 
Post 4B - LZX_EXPAND 
Post 4E - FETCH_OFFSET_6BL_CF 
Post 4F - VERIFY_OFFSET_6BL_CF 
Post 50 - LOAD_UPDATE_1 
Post 52 - BRANCH 
Post 58 - INIT_HYPERVISOR 
Post 59 - INIT_SOC_MMIO 
Post 5A - INIT_XEX_TRAINING 
Post 61 - INIT_HAL_PHASE_0 
Post 63 - INIT_KERNEL_DEBUGGER 
Post 64 - INIT_MEMORY_MANAGER 
Post 65 - INIT_STACKS 
Post 66 - INIT_OBJECT_SYSTEM 
Post 67 - INIT_PHASE1_THREAD 
Post 68 - Started phase 1 Initialization + INIT_PROCESSORS 
Post 69 - INIT_KEY_VAULT 
Post 6A - INIT_HAL_PHASE_1 
Post 6B - INIT_SFC_DRIVER 
Post 6C - INIT_SECURITY 
Post 6D - INIT_KEY_EX_VAULT 
Post 6E - INIT_SETTINGS 
Post 6F - INIT_POWER_MODE 
Post 70 - INIT_VIDEO_DRIVER 
Post 71 - INIT_AUDIO_DRIVER 
Post 73 - INIT_SATA_DRIVER 
Post 76 - INIT_SYSTEM_ROOT 
Post 77 - INIT_OTHER_DRIVERS 
Post 78 - INIT_STFS_DRIVER 
Post 79 - LOAD_XAM 
Shutdown
Click to expand...
[h=3]*** R-JTAG SUPPORT TEMPLATE - READ AND FOLLOW THIS BEFORE ASKING FOR ANY SUPPORT ***[/h]
 
You must log in or register to reply here.