RGH No Xell Jasper BB 256Mb (RGH2.0).

[jtag360.nl]

Hi All,
I am busy with a cocky Jasper BB 256Mb CB6753.
All solder went well off course (I will upload photo’s later, I am at work now).
Read out the Nand(no BadBlocks ) and created a ECC image with J-Runner Build 271 and write it to the Nand.
Removed the C15 on the CR rev.B.
I used different resistors and even no resistor at the CPU_RST, and using an double shielded 50Ohm cable.
I even try to put a 68nF Cap in series at the CPU_RST.

Edit: I used first off al Jed A and D for the Jasper. And also B and C but you see when you start up the Xbox the green light on the CR blinks the first time 2 times then 1 every 5 sec..

But still no luck to boot it in XELL.

Maybe someone help me.

I will upload some photo’s and the log later on(no problems with creating the ECC image) I am at work now.

Thanks in advance.

 

[zackf89]

wrong section...but anyways jaspers are hard to glitch b/c RGH2.0 wasnt supposed to b released until it was stable

 

[BL4K3Y]

Thread moved to the correct section.

OP: images of your soldering are mandatory - without these, we cannot help you.

 

[jtag360.nl]

wrong section...but anyways jaspers are hard to glitch b/c RGH2.0 wasnt supposed to b released until it was stable

I know that it was not ready to releas it yet, some person leaked it out( i hope he learned his lesson).

Sorry for the wrong section. Thank you BL4K3Y for moving it.

Finnaly i got it glitch but it was a long time waiting, but ik got the keys.

I made some pics, but those are not usefull now. :redface:

This topic can be closed now.

Thank you.