CORONA noob need help whith corona v1 to rgh!!!

[malamas]

hi guys im new in xbox end im very confice all this days read forums but nothing so i want make my xbox slim rgh of flash dvd fw to play copy cd so pliz help me to understant what i need exacly end how to start ?
first need make rgh? need hack my dvd rom?. so for rgh need buy only the CR4 XL? this is all done??? or need anything alse?? sow me pliz the road steb by step on link tut. or better whith videos if this easy for you . big thx you all for your help. and sorry for my bad english im from greece end my english is very bad to write better of this but if need i try whith google to explane better of this if you dont understant me .
so this is my console end im not sure if is corona v1.

xbox360 slim dashboard: 2.0.17349.0


dvd drive:
Philips & Lite-on
model: DG16D5S -11B
FW ver.: 1175 HW ver.: A0A0
manufactured: may,2012

CHIP CONSOLE NAND:
16MB NAND-(HYNIX OR ST TSOP)
standard NAND R/W (NAND-X, JR Programmer etc)
standard POST_OUT

CORONA V1 (WITH 250GB HDD) i have hdd250gb but im not sure if corona v1 model

out back of console write this in plastic case :
model 1439
2012-06-27:MFR date
12V 9,6A 5V 1A

last this is my power suple
model: A10-120P1A rev: 1
output DC: 120W 12V 9.6A , 5Vsb 1A

 

[ins0mniac]

http://team-xecuter.com/forums/threads/78885-RGH-roadmap-for-n00bies

 

[malamas]

this is all i need to hack my console?? my console is original!! no have keys no have back up of nand no have nothing you sure need only this chip https://www.youtube.com/watch?v=7434hV6sRBg and im done to make my console play in external hdd?
and my secont question is this chip stay in xbox ? or make the work and take out of console??

so this chip not work to my console? CR4 XL or cr3 lite whith the matri x nand programmer reader writer not work this to my xbox? or maybe not work together? if not good for my console this pliz help me to find one of there is greek site and it easy to me to buy the chips look photos here and tell me what need to buy or what is the best deal for me to buy http://prntscr.com/8khckg http://prntscr.com/8khdbb http://prntscr.com/8khdt6 .

reason is my country have capital control and no have choise to buy out in internet for other country's

 

[ins0mniac]

you need a

nand reader/ writer
cr4 glitch chip
soldering iron
flux
desolder braid
some spare wire

theglitch chip stays in side the xbox all the time youwant to play from external hdd

 

[malamas]

look up the photos only this find easy in my country

 

[Nintendo]

look up the photos only this find easy in my country

IF that's all you can get, buy the CR4, and to read/write the nand, I see that that website doesn't have stock of JR-Programmers. I threw away my MTX nand flasher when I got the JRP, it's bad but if that's the only thing you can buy, go for it, but if you plan on doing several RGHs it will drive you mad.

 

[malamas]

i find this http://www.ebw.gr/el/product/47738/TX-JRunner-NAND-X-CR-Slim-Corona-QSB-V3 so this i see work in cr4 right?.
there: http://team-xecuter.com/forums/threads/147807-CR4-XL-SLIM-Corona-v1-v2-Install-Guide-(RGH2-) install on corona v1 right?. so the external bord here is not need right in this tut. is extra??
so me make my work if buy this CR4 XL and this TX JRunner NAND-X CR - Slim Corona QSB-v3 only?.
now what the deference give me if buy this 2 of the others older board?
for this chip i have free to update my dasboard and if use older chip stop in old dashbord? or no have deferance?
if not have deferance the older chip of cr4xl and TX JRunner NAND-X CR - Slim Corona QSB V3 is lower cost , so if not give me anything special the new chip is better use older chip .
and secont no look anything good exemple tut. for cr4xl and TX JRunner NAND-X CR - Slim Corona QSB-v3 how to install on corona v1?

so what is your opinion ? if you understant me and thx you .

 

[Nintendo]

i find this http://www.ebw.gr/el/product/47738/TX-JRunner-NAND-X-CR-Slim-Corona-QSB-V3 so this i see work in cr4 right?.
there: http://team-xecuter.com/forums/threads/147807-CR4-XL-SLIM-Corona-v1-v2-Install-Guide-(RGH2-) install on corona v1 right?. so the external bord here is not need right in this tut. is extra??
so me make my work if buy this CR4 XL and this TX JRunner NAND-X CR - Slim Corona QSB V3

TX JRunner NAND-X CR - Slim Corona QSB V3
TX JRunner NAND-X CR - Slim Corona QSB V3


TX JRunner NAND-X CR - Slim Corona QSB V3
TX JRunner NAND-X CR - Slim Corona QSB V3 only?. now what the deference give me if buy this 2 of the others older board? for this chip i have free to update my dasboard and if use older chip stop in old dashbord? or no have deferance? if not have deferance the older chip of cr4xl and TX JRunner NAND-X CR - Slim Corona QSB V3 is lower cost , so if not give me anything special the new chip is better use older chip . so what is your opinion ? if you understant me and thx you .

You can use CR4 no matter the dash version. But if you are not getting a JR-Programmer and you buy the QSB, you won't be able to read the nand (I mean, you'll be able but it would make no sense)

 

[malamas]

ok tell me the best way for me and im try find in my country shop give me the right chip names or better photos too if you like.

so thx you if not have diference old chip in the new cr4 i find in same greek site in best prise this chip cr3 light and m atrix nand programer is good to buy? and make my work well same new chip cr4?? or need buy more items?

 

[Nintendo]

ok tell me the best way for me and im try find in my country shop give me the right chip names or better photos too if you like.

so thx you if not have diference old chip in the new cr4 i find in same greek site in best prise this chip cr3 light and m atrix nand programer is good to buy? and make my work well same new chip cr4?? or need buy more items?

If you want decent boot times go for the CR4, then, to read the nand, get a "JR-Programmer" if you can. That would be all. If you get another nand reader, it won't work with the QBSs. Try to look for it.

 

[malamas]

oo sh*t the matri-x no work in my console or not work cr4 and matri-x together?

is hard find JR programmer in my country

ooo im so sorry you mean this? http://prntscr.com/8kiyu2

 

[malamas]

so the best way to my console is cr4 and Xecuter JR Programmer V2 ? work together good up in my console right???

so you have any clear good tut. for my corona v1 in this 2 chips if work this chip for me?

 

[ins0mniac]

http://team-xecuter.com/forums/threads/147807-CR4-XL-SLIM-Corona-v1-v2-Install-Guide-(RGH2-)

 

[Titanfreak736]

why get a cr4 when a ace v3 is just as good espically for key recovery my demon dual nand and ace v3 its sweet boots in 1 to 2 glitches with 15432 timing files and cr4 speedup files

 

[Nintendo]

why get a cr4 when a ace v3 is just as good espically for key recovery my demon dual nand and ace v3 its sweet boots in 1 to 2 glitches with 15432 timing files and cr4 speedup files

What warranty do you get with an Ace V3? And with a CR4?. You really don't know what are you talking about, it's another method of glitching.

 

[Titanfreak736]

yea well personally i love tx and have gave them hundreds of dollars of my $ jr programmer 2 demons 1 cr3lite x360usb pro v2 all bought from offcial re sellers, personally i like tx, but im not going to lie the ace is a badass chip i installed it with a demon dual nand and srgh files its boots stock fine without cr en and all that, its sweet, oh and yea there is no warranty but with the 9$ you spent you could jus tget another one in the rare occasion and lets all be honest has anybody ever warrantied a mod chip it could always be user errror ie improper soldering and such it seems kinda rare that you would have a dud but im sure its possible oh and yea those cr4 speedup files are bad ass thank you guys

 

[Titanfreak736]

What warranty do you get with an Ace V3? And with a CR4?. You really don't know what are you talking about, it's another method of glitching.

how do i not know what im talking about im just saying that a ace is way cheaper and is instaboot or 2 glitches as long as your patient and play along with the files

 

[Nintendo]

how do i not know what im talking about im just saying that a ace is way cheaper and is instaboot or 2 glitches as long as your patient and play along with the files

I mean that both glitchips don't use the same Method, and I don't have the time to play with wire lenghts or files, that's the difference between them, TX released RGH2, and I support the innovators, because these guys know their stuff better than anyone out there, and you know it, since you have a Demon and a X360Usb

 

[Titanfreak736]

true tx makes some bad ass sh*t but for the record i didnt have to mess with wire lengths

 

[john mathews]

true tx makes some bad ass sh*t but for the record i didnt have to mess with wire lengths

U dont have to.mess with wires on cr4 xl either