NOOB XAPT3R question
- Thread starter jagermeist1
- Start date
Those little extra pins in the baggy are rivets; they’re optional if you plan to use the adapter on a v1.0 Xbox because the LPC holes are filled with solder. They provide a flatter surface when fitting to the v1.0. If you do have a v1.0 I recommend you toss them out, de-solder the LPC holes and use the Xapt3r without them, you will have a better and tighter fit..
o sh*t the x3 be crap i cant not get nothing to ahaappin whence me plugered its n2 da controlla ports
does i has to put it n port 1???????
does i has to put it n port 1???????
I took care of everything I went ahead and used the wire install since (in my opinion) it was 100% easier then trying to de-solder the holes just heated up the solder and stick the wire in! So now I'm stuck with a solderless adapter but I've got a buddy that is thinking about modding his box but I'll make sure he dosen't ask anyone in here for help as it seems like there are quite a few conceited smartasses in here! BTW thanks Wolf for giving an intelligent response to someone who was just looking for some help!
Redneck
VIP Member
there needs to be a n00b forum like on xbox scene ill tell martin
nothin against n00bs, but that would solve the problem of impatient people reading n00bs post, everyone wsa a n00b at some point.
nothin against n00bs, but that would solve the problem of impatient people reading n00bs post, everyone wsa a n00b at some point.
Hmm I installed my X3 without them on a 1.0 box.1911Wolf said:
Oh well I'll see if it comes loose.
Why can't team xecuter just make some pdfs on how to install these things.
yes but most noobs don't search first. if they did alittle searching through the site the'd find the answer to most of their questionsRedneck said:
ACB abgx 1.0.4 ok?
Hi,
Ran my assassins creed through abgx 1.0.4 and it was a repaired and patched, with the release of abgx 1.0.5, should I now run it through new version and re-burn or should 1.0.4 be ok?
Hi,
Ran my assassins creed through abgx 1.0.4 and it was a repaired and patched, with the release of abgx 1.0.5, should I now run it through new version and re-burn or should 1.0.4 be ok?