RGH Noobs RGH Pack

C

cool_recep

Noob Account
Jan 6, 2013
7
0
I have an untouched 360 Slim 4GB PAL Trinity/Velje and I want to RGH it.

It is on the latest dash. I have done JTAG to a Zephyr before. But never RGH.

What are the tools I need and what is the solder order?

According to my search, I have compiled that list:


-Xecuter Daemon to backup the NAND
-Xecuter DGX 1.0S to get the Key
-CR3 Lite to glitch the console
-Xecuter Unlock Kit v3

I have an SPI flasher from the time I have JTAG'ed my Zephyr console but I don't know if I can get a proper dump of the nand with that.

Do I need J-Runner USB Comms Cable? What is it for?

Im looking for the smoothest possible install, So im wondering if any QSB's (and which) are recommended and how to hook them up. Im probably gonna desolder the DGX once i get my keys.


Also is this the right order:

Solder DemoN -> Read/backup nand, Flash new ECC nand -> Solder DGX -> Get key(s) -> Desolder DGX -> Solder Coolrunner/CR3 lite - > flash the timing files to the CR via DemoN -> flash freeboot via DemoN

Also how do I configure Dual boot?
 
Last edited:
Captain Skeet

Captain Skeet

BANNED
Dec 31, 2012
7
0
DubV
^^Really? Honestly this has gone way to far..He is posting in "The Noob Room". And he has his mobo listed, xbox type; stated the tools he believes is supposed to work and then you have some piece of sh*t scum of the earth with 33 post that basically says "f**k off, google it". The guy wants a yes or no answer...and an explanation for the reason why. I'm not a genius, but can we please set an example for doushbags like the guy above me please? Don't let this forum become a se7ensins.

Now for my response to the OP.
From my understanding sir you are correct for the most part. Instead of daemon I would use J-Runner. And instead of a custom SPI Flasher I would use the J-Runner Programmer V1.1 with the speed addon. The J-Runner Programmer requires a comms cable for the "Best" results or you can use the network and pull keys after you flash the nand but in my research I have found that the comms cable has the best results.
 
Last edited:
  • Like
Reactions: Lisac1606 and cool_recep
boogaman01

boogaman01

Full Member
Apr 18, 2011
67
0
Texas
So sorry to offend you. I was simply saying that most of the answers to his question would be in that section. I had to do a lot of reading and searching to be able to do the things listed above.
 
madhacker83

madhacker83

BANNED
Feb 23, 2010
251
0
New Orleans, LA
boogaman01 said:
So sorry to offend you. I was simply saying that most of the answers to his question would be in that section. I had to do a lot of reading and searching to be able to do the things listed above.
Click to expand...
Id have to agree, every single bit of info needed is already posted here extensively. It just takes a little work from the person wanting to learn. I did a demon/cr3 on my very first install just by, searching and reading all the info posted on these forums.

To OP, you only need a demon if your planning to dual nand your 360. The order would go as follows, use nandx/jrp/demon to dump nand and flash dgx ecc to nand,install dgx, recover cpu key with dgx (com monitor cable recommended but ethernet cable works fine to). build rgh dash with nand dump and cpu key, flash rgh dash you just created with nandx/jrp/demon. Flash coolrunner, install coolrunner, boot into you new rgh xbox.

It is highly recommended and a lot easier to use the
Trinity v3 qsb with com cable (nandx usb update cable or DIY cable)
 
Last edited:
  • Like
Reactions: cool_recep
thehunter398

thehunter398

BANNED
Aug 18, 2012
293
0
All you need to do a trinity is as follows

Nand-x (Preferred as its cheaper and easier then a demon to install) or demon...this is to read and write the nand

DGX for getting CPU Key

Coolrunner

That is all you need. If you have any more questions PM me.
 
  • Like
Reactions: cool_recep
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
Captain Skeet said:
^^Really? Honestly this has gone way to far..He is posting in "The Noob Room". And he has his mobo listed, xbox type; stated the tools he believes is supposed to work and then you have some piece of sh*t scum of the earth with 33 post that basically says "fcuk off, google it". The guy wants a yes or no answer...and an explanation for the reason why. I'm not a genius, but can we please set an example for doushbags like the guy above me please? Don't let this forum become a se7ensins.
Click to expand...
So that reference makes you any better?

TBH the reply to read the noob guides is fair enough. We don't have the bandwidth for every first-timer to have a 20 page thread on what to so, hence the guides and stickys are there for you peeps to develop a proper understanding before posting. Somehow many of you can't read, which I would address first and foremost.
 
C

cool_recep

Noob Account
Jan 6, 2013
7
0
For those who sarch google and find this thread, here is the final list:

JR Programmer v1.1 (w/ Speed booster) [176] - $24.95 : VGCrepairs, We do it right!
QSB V3 Monitor / Comms USB Cable [comms_v3] - $9.95 : VGCrepairs, We do it right!
TX DGX V1.0 Slim [cr3_DGX] - $39.95 : VGCrepairs, We do it right!
Xilink XC2C64A CRv3 Lite [CR_v3_Lite] - $29.95 : VGCrepairs, We do it right!
XBOX 360 Unlock Kit v3 Xecuter XBOX 360 Unlock Kit v3 - Sold at VGCrepairs [161] - $9.95 : VGCrepairs, We do it right!
Trinity QSB V3 Trinity QSB V3 at VGCrepairs [190] - $9.95 : VGCrepairs, We do it right!
 
XEX DriZzy

XEX DriZzy

VIP Member
Feb 22, 2012
189
0
Wisconsin, USA
You do not need the QSB's and the unlock kit but they would make it a bit easier for you ;). Also, you sure you need the DGX? Is your dash 15574 or higher?
 
Last edited:
C

cool_recep

Noob Account
Jan 6, 2013
7
0
OK, I am going to update the list since the new DGX and the Ultimate kit is out:

Xilink CRv3 Pro Ultimate Kit [CR_v3_Pro_ULT] - $69.95 : VGCrepairs, We do it right! (CR3 Pro + JR Programmer V2 + QSB V3 + Cables)
TX DGX V1.1 Slim [cr3_DGX_v11] - $39.95 : VGCrepairs, We do it right!
XBOX 360 Unlock Kit v3 Xecuter XBOX 360 Unlock Kit v3 - Sold at VGCrepairs [161] - $9.95 : VGCrepairs, We do it right!

The first pack was $124.7

Now it is: $119.85

Not much difference huh :) But I love this new pack. Just 3 items (kinda) and you are done shopping.
 
Last edited:
C

cool_recep

Noob Account
Jan 6, 2013
7
0
I have heard that we don't need the DGX anymore. Can you please help me update the required parts list and the process flow.
 
You must log in or register to reply here.