Not Glitching

[smudger075]

I would like to know what the problem was that was cured in this post I have the same problem. Although my coolrunner was working. but has just stopped with the same problem.

http://team-xecuter.com/forums/showthread.php?t=79916

---------- Post added at 18:08 ---------- Previous post was at 18:05 ----------

and because I can't ask in that thread due to my status I've created this thread.

 

[Goldensavage]

The original thread you refer to was solved as it was a soldering problem originally.

Either go over your soldering or post some clear pics here so we can look.

 

[ochbay]

this happened to me i would check ur cpu bypass wire as long as the box is bootin up but just not glitching

 

[SpankinMonkey]

sometimes when you put the console back together the wires the cpl bypass wire gets crimped between the dvd drive leg and the console metal case. i accedently severed mines off. one time. luckily i knew what i was doing and manage to correct the problem right away

 

[smudger075]

the box has red light on coolrunner and the power switch light lights green but thats it, no Video out. I'm going to check al solder joints at the weekend. Thanks for the replies.

 

[smudger075]

Sorted after looking at photos of others fitted coolrunners, I noticed one of my wires was conected in the correct place. I did not fit coolrunner but was fitted by another. once I corrected the wire and soldered to the B connecter all worked ok.

Thanks to all who helped.

---------- Post added at 18:13 ---------- Previous post was at 18:09 ----------

Sorted after looking at photos of others fitted coolrunners, I noticed one of my wires was conected incorrectly and in the wrong place.
I did not fit coolrunner but was fitted by another. once I corrected the wire and soldered to the B connecter all worked ok.

Thanks to all who helped.

smudger075 - XBOX 3

 

[garageinc]

I would like to know what the problem was that was cured in this post I have the same problem. Although my coolrunner was working. but has just stopped with the same problem.

http://team-xecuter.com/forums/showthread.php?t=79916

---------- Post added at 18:08 ---------- Previous post was at 18:05 ----------

and because I can't ask in that thread due to my status I've created this thread.




Sorted after looking at photos of others fitted coolrunners, I noticed one of my wires was conected in the correct place. I did not fit coolrunner but was fitted by another. once I corrected the wire and soldered to the B connecter all worked ok.

Thanks to all who helped.

:rolleyes2: accurate information from the start gets results faster.