Hello, I posted in this forum because I do not yet have the post count to post elsewhere:
I sold a Jasper 512MB RGH console to someone online about 2 months ago. They had it working just fine for about a month. The guy calls me after a month and says that it won't boot the dashboard anymore, it will only boot xell. He says that his brother was trying to add online functionality with some patch and that made the dash not boot anymore.
I do not know what patch he is refering too or anything like that, so I am treating the console as if it had a bad flash and trying to go from there.
Here is the problem: I get the console back, and the LDV value is 2 (fuse line 07 has 2 fs). Xell is indeed booting just fine and the KV seems to be correct. The Original 13599 NAND that I have from when I first did the console also has an LDV value of 2, so I do not believe that the console was put through any kind of Microsoft update. However, when I make a 14719 update using J-runner, the CPUKey and the Original NAND, the console will still only boot Xell and will not boot dash.
The console boots Xell on the first green blink every single time. When I try to boot with the power button, the green light blinks once, and then does not blink again. There is nothing that happens on screen at all.
I have no idea where to go from here. It seems that the LDV value is fine, and my method for creating the NAND is fine, but it doesn't boot. I have tried flashing the Original NAND and booting it: that works fine too.
Any ideas? I could post you wiring if you want, but I have rewired the whole console since this started with no change.
I sold a Jasper 512MB RGH console to someone online about 2 months ago. They had it working just fine for about a month. The guy calls me after a month and says that it won't boot the dashboard anymore, it will only boot xell. He says that his brother was trying to add online functionality with some patch and that made the dash not boot anymore.
I do not know what patch he is refering too or anything like that, so I am treating the console as if it had a bad flash and trying to go from there.
Here is the problem: I get the console back, and the LDV value is 2 (fuse line 07 has 2 fs). Xell is indeed booting just fine and the KV seems to be correct. The Original 13599 NAND that I have from when I first did the console also has an LDV value of 2, so I do not believe that the console was put through any kind of Microsoft update. However, when I make a 14719 update using J-runner, the CPUKey and the Original NAND, the console will still only boot Xell and will not boot dash.
The console boots Xell on the first green blink every single time. When I try to boot with the power button, the green light blinks once, and then does not blink again. There is nothing that happens on screen at all.
I have no idea where to go from here. It seems that the LDV value is fine, and my method for creating the NAND is fine, but it doesn't boot. I have tried flashing the Original NAND and booting it: that works fine too.
Any ideas? I could post you wiring if you want, but I have rewired the whole console since this started with no change.
Last edited:
