LITEON DG-16D4S - SLIM Not sure which tools I need.

eLTrole

Noob Account
Sep 29, 2013
8
0
Hey,

I am not sure if there is reading material about this matter or not, so I just went ahead and asked.
I have the Xbox 360 4GB Slim that I bought a few years ago, and I had it taken care of in the shop with LT 2.0 or so back then.
I would like to flash it myself this time, and buy the tools needed.

I read around the forums and some of them said that I do not need the X360USB Pro, some said that I need the Probe, some did not.
Some said that I could use my computer's power supply, others said I need to buy an external power supply.

Read this guide: http://team-xecuter.com/forums/showthread.php/67780-Liteon-DG-16D4S-0401-(Slim)-Unlocked-PCB-Pro-Kit-Step-By-Step-Guide, and it said nothing about a probe, so I am not sure.

Which tools do I need exactly to be able to flash my xbox to the latest LT version? my drive is DG-16D4S, FW: 040, HW: A0A0

Thanks.
 

ezzda1

VIP Member
Jul 8, 2009
779
0
Bolton, UK
X360 usb pro v 2.
Everything is built in. You can use a sata power source from your pc. Or an external power sorce if you're flashing it with a laptop.
Its also awesome for ripping your games.
 
  • Like
Reactions: eLTrole

eLTrole

Noob Account
Sep 29, 2013
8
0
X360 usb pro v 2.
Everything is built in. You can use a sata power source from your pc. Or an external power sorce if you're flashing it with a laptop.
Its also awesome for ripping your games.
Is it really all I need?
I also can not find it for purchase, it is sold out everywhere. Any ideas about a place that ships worldwide that is not sold out?
 

xzanox

VIP Member
Nov 1, 2011
909
0
Netherlands, 1336
So I finally got the V2, but I am trying to follow this guide: http://team-xecuter.com/forums/showthread.php/67780-Liteon-DG-16D4S-0401-%28Slim%29-Unlocked-PCB-Pro-Kit-Step-By-Step-Guide
And at step 9 I am not sure what do I need to do exactly.
I read that I need to either replace a PCB, or do a kamikaze hack, does it all apply to me? my drive seems to say this on the chip: MEDIATEK and it starts with 05.
The winbond 05 chip will require the kamikaze hack yes, or replace the board with an unlocked replacement pcb.
 
  • Like
Reactions: eLTrole

eLTrole

Noob Account
Sep 29, 2013
8
0
Is it possible that the hack was already done in shop when I bought it a few years ago?
Here are a few pictures of the chip, it seems like it was marked, and drilled or something. Can I verify this somehow?
http://imgur.com/a/TdU2Q
 

unkn0wn.92

VIP Member
Jun 30, 2011
665
48
AMM,Jordan
Is it possible that the hack was already done in shop when I bought it a few years ago?
Here are a few pictures of the chip, it seems like it was marked, and drilled or something. Can I verify this somehow?
http://imgur.com/a/TdU2Q
its drilled and its unlocked if you gonna update the fw to the latest "LT 3.0" you just have to power the drive with x360 usb pro and follow the steps on the forum no need to drill again
 
  • Like
Reactions: eLTrole

unkn0wn.92

VIP Member
Jun 30, 2011
665
48
AMM,Jordan

unkn0wn.92

VIP Member
Jun 30, 2011
665
48
AMM,Jordan
I guess you mean the original one before they took care of it in shop? nope...
then follow the whole tutorial its simple
1.grab your dummy.bin.
2. load the latest FW " JF will do it automaticlly".
3.enter the vendor mode and unlock the drive .
4. write the fw and lock the drive again.
5.Enjoy.

its all there
 

eLTrole

Noob Account
Sep 29, 2013
8
0
On step 9 I get an error that says: "Device Intro Failed!", and I did try to cycle the power.