Not trully understanding http flash

[2xthaeffort]

ad the tuts and I have my slayers disk in and have my main screen up. I have a X2.6CE and it came with a bios on it. I wanted to flash to the newest bios, because this bios doesn't have double boot option.

Well I have a router:
192.168.0.?

Xbox is showing:
192.168.0.???

Now from my PC which has the bios on it, I tried accessing the xbox, buy going to my browser and typing 192.168.0.??? (xbox IP)

I get access denied!

From the documentation I am not trully understanding what I missed. I started reading the posts of others and still followed them and nothing. I can see the xbox through FTP, but not http. Anyone had this problem and fixed it?

 

[Big_Whoopin]

What is providing you the IP on the Xbox? FlashBIOS or the Slayer's disc? Only FlashBIOS has the HTTP flash option, if you are already booting from a mod BIOS (necessary to load Slayers) then you aren't going to have HTTP booting available. If you have FlashBIOS on bank 2 (frequently recommended) you may be able to boot off of there and then HTTP flash. So long as you don't flash a file larger than 512KB your 2nd bank won't be touched. Alternately, since you are already loading Slayers (actually the EvoX dashboard underneath) there should be a flash option somewhere in there. But what I would actually recommend since you can already boot mod software is that you use FlashX to update your BIOS. This is a utility designed by Team Xecuter specifically for flashing X2 chips. Best control you will have over a flash short of using an external programmer.

-Whoopin'

 

[2xthaeffort]

Thanks bro will try flashX. I tried using the Slayers CD to to flash. It has the option to flash but only from the Bios' they have on the disk. I figured I would have to either create another slayers with the bios I wanted on it or, I would have to get a programmer, but I'll try the recommeneded option first