my apologies if this has been asked before, but here is my problem nonetheless. two days ago, i installed an x3 on my v1.0, and everything was working fine. flashed and dashboard installation went smoothly and installed a new HD. After a day of using it, it was turned off and then tried to turn back on, and only one of the two lights on the chip turns on. Also, it turns itself on and off, and frags. The light on the external switch is blue, and purple with power/eject and red with power hold etc. I suppose my brothers and sisters who were playing it had a pretty long gaming session (couple of hours nonstop?) I don't know if that has anything to do with anything and for information purposes, it was flashed with the most recent BIOS. thanks, in advance, if you guys can help me.
odd fragging
- Thread starter MrKite
- Start date
Flashing orange usually means the A/V cable isn't plugged in properly, if at all. Try disconnecting and reconnecting it.MrKite said:Its been about a day or two, and the connections look fine. Also, now the lights are flashing orange.
yourM0M
VIP Member
hwoBU
Full Member
there is also the possibility of heat damage if you forgot to plug the fan back into the mobo, if this is the case the heat in the case may have been enough to damage any one of the chips on the board (though, most likely either the video chip or CPU). If this is the case (especially if your siblings were playing for a long time) you may have to purchase either a new mobo or a new xbox alltogether. You may try booting back to the MS Dashboard to see if the box will still boot at all.
ok, thank you, one question though. nothings wrong with my chip right? if i get a new motherboard and install the chip on there, it will work right? and one more thing, any tips, fan settings, etc. so this won't happen again. (other than not playing for a long time)
burned CD not working
I got ARCADE Xbox360 and it has mod and i used to play burnd games.
I got call of duty modern walfare 2 but the game not working,
I though it something related to the DVD but I got more then two games after modern walfare2 but still the games not working..
please help...
note: the games are pal.
I got ARCADE Xbox360 and it has mod and i used to play burnd games.
I got call of duty modern walfare 2 but the game not working,
I though it something related to the DVD but I got more then two games after modern walfare2 but still the games not working..
please help...
note: the games are pal.
Re: burned CD not working
when i bought the 360 it was mod already..
Here in our country the burned DVD's are availble in the market.for that i dont know too much info..
however, still the old games are runing well on the 360 like assassine cared 1, turak,dirt,and ect...
when i bought the 360 it was mod already..
Here in our country the burned DVD's are availble in the market.for that i dont know too much info..
however, still the old games are runing well on the 360 like assassine cared 1, turak,dirt,and ect...
Re: burned CD not working
but how can i update the firmware?
yea, I think so..joesinger47 said:sounds like the firmware needs an update
but how can i update the firmware?
Re: burned CD not working
link please....TAHAIC said:Read the tuts in the tutorial section.