** Official JTAG Tool Thread **
- Thread starter coolshrimp
- Start date
- Status
Download Flash 360 isn't displaying anything, and In driver/options all the lower tabs are not displaying either.
Once again, Love the tool man.. I moved to windows 7 but I mite have to dual boot winxp and 7 because windows 7 mouse accel drives me nuts, All tho I did do the mouse accel fix for it and its still so much faster than xp.. dunno
So if you want me to test it for you I can ( all tho you prob have a pc with winxp on it )
Cheers
found the proble i had those buttons set to the color of activcaption witch is difent on some pc's so it will be fixed in next version..
ok i got manual remaping working so any final requests before i release this thing?
i have put ALT SMC Options For (Original, AUD_CLamp Only , BOth AUD_Clamp & DVD_Tray)
also fixed the error of text not showing up..
when writing Freeboot to a BB Jasper It will say its a (Jasper 256mb ) dont worry its fine files only really 66MB so i use the 256 MB Command..
i have put ALT SMC Options For (Original, AUD_CLamp Only , BOth AUD_Clamp & DVD_Tray)
also fixed the error of text not showing up..
when writing Freeboot to a BB Jasper It will say its a (Jasper 256mb ) dont worry its fine files only really 66MB so i use the 256 MB Command..
rdubbs007
VIP Member
I was just curious about something with this tool, is it faster than command line? I use a USB SPI Flasher and I don't have a JTAG box, but I like to occasionally dump the nand for one of my modded boxes (especially when there is a dash update). It usually takes a while to dump the first 70 (I have a BB 512), somewhere between half an hour and 45 minutes I think? I was wondering if this tool sped up the dump process at all or if it just implemented the command line instructions into the tool, simply making it easier to use.
Coolshrimp,
I see the smc options, I get normal, and both but is the aud_clamp pointed at the alt db1f1 or the original db1f1 on top.
If not could you add that in with some coloring pages to view. (Pictures/Diagrams)
Again thank you for the tool I used it for the first time on a falcon board and and man did your upload hit when I opened up jtag tool. I thought is was my birthday all over again...
Now all you have to do is add in every flavor of smc options that arise for verious reasons.
I see the smc options, I get normal, and both but is the aud_clamp pointed at the alt db1f1 or the original db1f1 on top.
If not could you add that in with some coloring pages to view. (Pictures/Diagrams)
Again thank you for the tool I used it for the first time on a falcon board and and man did your upload hit when I opened up jtag tool. I thought is was my birthday all over again...
Now all you have to do is add in every flavor of smc options that arise for verious reasons.
Aud_clamp is just the audioclamp wire to the Underside.. or maybe the top i dono is there a diffrence? i dont think there is..
DB1F1 and Aud_Clamp i.e. Q2N1 are separate things. DB1F1 has alternatives on the reverse side of the motherboard, as for Q2N1, (to keep things simple) it doesn't have any alternative.
Possible Bug
every single time I try to read nand or write xell, I get a pop up Dialog Box for Just In Time debugger. I am using windows 7 and run this program as admin. Once this box pops up, I am no longer allowed to read or write at all. Please help. Here is the message as follows:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.IO.IOException: The requested operation cannot be performed on a file with a user-mapped section open.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options)
at System.IO.StreamWriter.CreateFile(String path, Boolean append)
at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize)
at System.IO.StreamWriter..ctor(String path, Boolean append)
at Jtag_Tool.JtagTool.WriteXellButton_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4952 (win7RTMGDR.050727-4900)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
Jtag Tool
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Program%20Files/Jtag%20Tool/Jtag%20Tool.exe
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Runtime.Remoting
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
DevComponents.DotNetBar2
Assembly Version: 9.0.0.0
Win32 Version: 9.0.0.0
CodeBase: file:///C:/Program%20Files/Jtag%20Tool/DevComponents.DotNetBar2.DLL
----------------------------------------
Accessibility
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
every single time I try to read nand or write xell, I get a pop up Dialog Box for Just In Time debugger. I am using windows 7 and run this program as admin. Once this box pops up, I am no longer allowed to read or write at all. Please help. Here is the message as follows:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.IO.IOException: The requested operation cannot be performed on a file with a user-mapped section open.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options)
at System.IO.StreamWriter.CreateFile(String path, Boolean append)
at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize)
at System.IO.StreamWriter..ctor(String path, Boolean append)
at Jtag_Tool.JtagTool.WriteXellButton_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4952 (win7RTMGDR.050727-4900)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
Jtag Tool
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Program%20Files/Jtag%20Tool/Jtag%20Tool.exe
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Runtime.Remoting
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
DevComponents.DotNetBar2
Assembly Version: 9.0.0.0
Win32 Version: 9.0.0.0
CodeBase: file:///C:/Program%20Files/Jtag%20Tool/DevComponents.DotNetBar2.DLL
----------------------------------------
Accessibility
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
humm seems to be a File error program cannot access it sure no other programs are runing nandpro?
Download NandPro And replace the one installed with Jtag Tool.. let me know how it goes..
Download NandPro And replace the one installed with Jtag Tool.. let me know how it goes..
Any thoughts on implementing the KV Hash Check removal options of the new fbbuild .04? I have a falcon stuck on 8955 due to a KV swap that simply refuses to upgrade. Thanks!
mcornbill
VIP Member
Hi Guys
Since updating from v2.72 to v2.75 I can only perform one operation in the Jtag Tool that uses nandpro, i.e. read a nand image once, or write Xell/Xellous once. When trying to do a second thing in the Jtag Tool then I get this error:
Unhandled exception.
The requested operation cannot be performed on a file with a user-mapped section open.
I've had this error before with other programs completely unrelated to this. After a reboot I can then use the Jtag tool but again only once until this bloody error comes back. Bit annoying having to reboot twice just to get three nand dumps!
Anyway I came on here to see if anybody had the 2.72 version as I had no issues with that one. I can't find a download link to previous versions.
Cheers
Mark
Since updating from v2.72 to v2.75 I can only perform one operation in the Jtag Tool that uses nandpro, i.e. read a nand image once, or write Xell/Xellous once. When trying to do a second thing in the Jtag Tool then I get this error:
Unhandled exception.
The requested operation cannot be performed on a file with a user-mapped section open.
I've had this error before with other programs completely unrelated to this. After a reboot I can then use the Jtag tool but again only once until this bloody error comes back. Bit annoying having to reboot twice just to get three nand dumps!
Anyway I came on here to see if anybody had the 2.72 version as I had no issues with that one. I can't find a download link to previous versions.
Cheers
Mark
Last edited:
XboxManchester
Noob Account
rdubbs007
VIP Member
mcornbill
VIP Member
In case anyone gets this error I found out the problem. AVGIDSAgent is locking up the CMD.bat for some reason, yet to find a way of stopping this from happening though without having to disable AVG.
Cheers
Mark
Last edited:
- Status