** Official JTAG Tool Thread **
- Thread starter coolshrimp
- Start date
- Status
keil423
VIP Member
Hey this is simply a fantastic tool you created here coolshrimp. Worked like a charm the first time i used it. Have a beer on me Bud!
Jason A...
Transaction ID #3U921593G4593004R
Jason A...
Transaction ID #3U921593G4593004R
Last edited:
Did 2 nand dumps with v4.23 from my falcon through lpt cable.
This is so much slower to dump then when I manually dump it with nandpro2.0e.
With the old one manual cmd commands it takes about 35 minutes, but with this tool and nandpro 3.0 it takes about 1 to 1,5 hours.
Any idea why this is?
Also compared the first 2 dumps. About 6 or 7 differences between both dumps. Very strange.
This is so much slower to dump then when I manually dump it with nandpro2.0e.
With the old one manual cmd commands it takes about 35 minutes, but with this tool and nandpro 3.0 it takes about 1 to 1,5 hours.
Any idea why this is?
Also compared the first 2 dumps. About 6 or 7 differences between both dumps. Very strange.
after a glitch reset will the console become jtagable?
if not explain if so please explain also!
if not explain if so please explain also!
Goldensavage
VIP Member
Would would be the point. They do virtually the same thing.
But i wouldn't think so. As any update past the early 7***'s would have stoppped Jtag's. Being able to glitch your 360 won't change that.
The RGH is just stopping code from running at a certain point, so that new code can be run instead. Nothing about the dashboard is being changed.
Martin C
VIP Member
Just an FYI - you don't have to run separate commands for 256/512 Jaspers.
They are essentially the same thing and only need 64MB dumped from them.
In addition to this, downloading a donor nand for a 256/512MB jasper only has to be a 64MB dump too. The data after 0x1000 is irrelevent to anyone else.
They are essentially the same thing and only need 64MB dumped from them.
In addition to this, downloading a donor nand for a 256/512MB jasper only has to be a 64MB dump too. The data after 0x1000 is irrelevent to anyone else.
I found a bug, also last version 4.25!!
Have a Zephyr CB 4578, glitches with .ecc in xell only.
tried to create freeboot with Jtagtool and freetoolbox maker with no luck, zero glitch.
Created freeboot with multibuilder 0.3 and right CB and works very well.
Have a Zephyr CB 4578, glitches with .ecc in xell only.
tried to create freeboot with Jtagtool and freetoolbox maker with no luck, zero glitch.
Created freeboot with multibuilder 0.3 and right CB and works very well.
BL4K3Y
VIP Member
Yes, except the image creation process is slightly different to fbBuild but both achieve the same end result.
So I installed it anyways and it appears that it does! This tool seems like it would make RGH'ing a slim CAKE!! I will definitely donate to you shrimp!! Question: Why am I getting exception errors upon opening the program? It does this anytime I click to flash or to do anything! Here's what it says:
EDIT: Fixed! My computer would not run this as Administrator so it would give errors. Rebooted then it worked perfect! Donating.
Last edited:
trying to do an old skool JTAG on a xenon board with this new JTAG tool...it keps telling me the following when trying to read the NAND:
can any one confirm if this is correct?
im going to assume the "ARM Firmware" that its talking about is the NAND-X update that were are suppose to do for the RGH and that i need to replace Nand pro 3.0a with Nand pro 2.0a (or what ever the last Nand PRo version was dont recall) in the JTAG tool install directory
can any one confirm if this is correct?
Heres some new news.
All Jtag Tool updates, Logs, More
www.JtagTool.co.cc
This Thread will no longer recive Updates/Logs just support. Please Visit New Site
Thanks to all past and future donators
I have just released 1 of 3 jtag programs
Reset Glitch Package (v1.00)
Supports 14699 Dash
All Jtag Tool updates, Logs, More
www.JtagTool.co.cc
This Thread will no longer recive Updates/Logs just support. Please Visit New Site
Thanks to all past and future donators
I have just released 1 of 3 jtag programs
Reset Glitch Package (v1.00)
Supports 14699 Dash
Love the jtag tool coolshrimp and I've used it almost exclusively. However I found something interesting. I have nine jtags and when I used the hacked xbox 1 emulation files to play xbox 1 games from an external drive, they would freeze at the white xbox logo screen when launching a game through freestyle 2.0 rc2.1 (2.2 doesn't work). I had one jtag that didn't freeze and the only difference was that the nand image was built with BestPig's tool. I have flashed the other xboxes now with BestPig's tool, three glitches, six jtags, and they all work with xbox 1 emulation when launching from freestyle dash 2.0 rc2.1. Could you test this and give some insight?
- Status