OFFICIAL SX OS v2.6 BETA Discussion

[MrStimmung]

yes it does. Try replugging and even rebooting?

Yes, not working here.

 

[Conaire87]

I've e-mailed [email protected] in relation to difficulties activating my sx pro, hopefully i get a reponse soon so i can start using it

 

[fjbm97]

HDD scanning is not working with this beta

update:

2.6 with 6.2.0 HDD works
2.6 with 7.0.1 HDD does not work.

I use ChoiDujourNX to swap versions

 

[galathea]

I'm having the invalid license code issue as well. I've tried activating both from the console and online. I'm using an SX os pro and it says I am using SX Lite.

 

[Aloa202]

I get the same error, it says my licenses is SX lite...
Anyone found out how to make it work ? I've bought the licences 1 week ago.
Thanks

 

[Olizuka]

Hello exuse me for langage i speak french.
I have a trouble with V2.6. I have my switch v7.0. I have a dump to 7.0 and i have emunand 7.0. I have play with sx with my swith maj 6.2 and it's fonctionnary .

But when i arrive to menu sx and i put in boot custom cw or boot normal, I have black screen.

I have tryied to use atmosphere, but i have critical error, and i used hachikate, i have a dump with old version, but with the new version hachikate 4.9 i have a probleme for restore dump, after that i have try to dump nand gpp partition and when arrived at user gpp i have a troble (no match emmc and SD card.

I think have a trouble with rawnand user.

But with sx os when my swith is in maj6.2 it's ok i don't have trouble. When i passed on maj 7.0 i always black screen.. I have just a dump nand but it's after that my switch maj 7.0.

Have you an suggestion for playing ? Do you think used choix du jour for maj 6.2 or réenitialised my switch with choixdujour? or anything else?

 

[Magic01]

Congratulation team xecuter.
Need activate Hdd usb support.

 

[Hudson88]

Just want to say a massive thank you for getting the support for 7.0 covered I am now making an emunand and nandbackup so I don't make the same mistake again lol..

 

[Aloa202]

Use SX 2.5.3, I could not get my license-request.dat to work using 2.6, kept saying that I was using SX Lite and that I needed to put my license code (even though I have SX Pro). Creating the license-request.dat on 2.5.3 and activating it manually on the website worked flawlessly. After you get the license.dat, just put it on the SD card and put the 2.6 boot.dat in the SD card. And it should work flawlessly

seemes like a bug, have seem other people on another forum saying they have that problem too.

I just did this and it worked thanks !!!!

Tried it without success..
Website says:
Looks like you are using SX Lite
:-(

as another user said, I tried and it worked

Use SX 2.5.3, I could not get my license-request.dat to work using 2.6, kept saying that I was using SX Lite and that I needed to put my license code (even though I have SX Pro). Creating the license-request.dat on 2.5.3 and activating it manually on the website worked flawlessly. After you get the license.dat, just put it on the SD card and put the 2.6 boot.dat in the SD card. And it should work flawlessly

 

[OvOvOv]

Does it include jit patches to the n64 emulator (Patch for svcControlCodeMemory )?

 

[nofeloniesyet]

would also like to point out to all the haters, lovin that atmos sept splash screen aint ya?

 

[gnilwob]

One of our mods just used this on his virgin 7.x switch. Activated just fine.

Did he use SX OS(inject payload.bin to generate license-request.dat) or SX Pro(use usb dongle to generate license-request.dat) to activate the license ?
Thanks.



So far, I have tested:
- Sysnand 7.0.1 (update by official way - internet) + SX 2.6 beta + Emunand(files on microsd type) 6.2.0
all these 3 modes, OFW 7.0.1, CFW7.0.1, CFW6.2.0 Emunand (files on microsd), work fine.

- Sysnand 7.0.1 (update by official way - internet) + SX 2.6 beta + Emunand(files on microsd type) 7.0.1
all these 3 modes, OFW 7.0.1, CFW7.0.1, CFW7.0.1 Emunand (files on microsd), work fine.

 

[Conaire87]

I used the Stable build as previously advised to get my license activated, thanks guys!

 

[JJTapia19]

Does it include jit patches to the n64 emulator (Patch for svcControlCodeMemory )?

I don't think it does and it's the only cfw missing that feature atm . Hopefully they add it on a future update. Can't wait to try it out on emunand.

 

[Nch93]

Im using sysnand 7.0.1 and emunand 6.2, now with 7.0.1 supporting, how can i update my emunand to 7.0.1?

 

[nofeloniesyet]

Did he use SX OS(inject payload.bin to generate license-request.dat) or SX Pro(use usb dongle to generate license-request.dat) to activate the license ?
Thanks.



So far, I have tested:
- Sysnand 7.0.1 (update by official way - internet) + SX 2.6 beta + Emunand(files on microsd type) 6.2.0
all these 3 modes, OFW 7.0.1, CFW7.0.1, CFW6.2.0 Emunand (files on microsd), work fine.

- Sysnand 7.0.1 (update by official way - internet) + SX 2.6 beta + Emunand(files on microsd type) 7.0.1
all these 3 modes, OFW 7.0.1, CFW7.0.1, CFW7.0.1 Emunand (files on microsd), work fine.

my setup was a sx gear and code sent to me in email. i used it 100% on console to get it activated,went through like a breeze.

 

[Ragnar]

I used the Stable build as previously advised to get my license activated, thanks guys!

Can I do that if I'm on 7.0.1? (I also get the 'appears you're on sx os lite on the web, and licence appears to be invalid in the switch itself)

 

[gnilwob]

my setup was a sx gear and code sent to me in email. i used it 100% on console to get it activated,went through like a breeze.

Thanks for your confirmation.

I hope there is no problem on SX Pro activation process as well.
Will report back if I heard of any issues.
Thanks.

 

[MacD]

First time user.

I waited patiently.

It paid off and I'm up and running.

Thanks Team Xecuter !!

Now i just have to learn how to do everything i want to ?

 

[bkintanar]

Got invalid license error as well.

Fixed it by doing the following.

1. Download 2.5.3 boot.bat file.
2. Copied boot.bat file to root of SD card.
3. Boot to SX dongle.
4. Clicked boot to CFW. It will warn you that you don't have license.bat.
5. Generate license-request.bat file.
6. Don't continue to boot to CFW.
7. Use https://sx.xecuter.com to generate license.bat file using the generated license-request.bat in Step #5.
8. Download 2.6 boot.bat file.
9. Overwrite the boot.bat file in your SD card with the new one.
10. Boot SX OS.