FIXED Ok, trying to install R-JTAG 1.1 on Zephyr

[[email protected]]

Console Type: Zephyr
NAND size: 16
Dashboard version: e.g 2.0.16203
CB version: e.g 4569
Was the console working before you started: Y (still works if I unsolder +5v from R-JTAG and upload stock image)

Description of problem:

As RGH2 doesn't work on Zephyr I decided to try R-JTAG. This is my first install of R-JTAG, but I've done a lot of RGH1/2.
See the log with the default voltage or 1.8V below.
with 1.2V consoles shuts down with RRoD 0010
Green LED blinks kind of strange. There is no consistancy in its duration, sometimes it blinks fast several times in one glitch cycle. Is it normal ?

Any suggestions accepted.

Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post C0
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6

 

[BL4K3Y]

Complete this template please.

Have you read this (it was updated earlier)?

 

[[email protected]]

Yeah, I've read that Zephyrs suck and that DIPs 7 and 8 are both on. Updated my first post.
Do you understand my rater log ? Does it say anything ?

 

[SoulReaper223]

i would clean up the points alot of them look oxidized

 

[[email protected]]

I have exactly the same everything as pengekcs, I just watched his youtube video, green LED blinks at the same way, sometime one long blink sometime several short during one glitch cycle.

http://team-xecuter.com/forums/showthread.php/136935-R-JTAG-on-zephyr-2nd-machine-still-no-success

 

[JohnWestBear]

Presume you have tried all dips on all voltage settings and left for at least 10 cycles at a time.

 

[The Pusher]

BL4K3Y look your PM, is important

 

[RF1911]

There was a typo in the new 1.1 announcement. Setting for new zephyr is 7-8 OFF OFF, basically the opposite of jasper. Please try this setting. Thanks

 

[Ubergeek]

Yeah I f**ked up

DIP SWITCH SETTINGS R-JTAG V1.1:

MOTHERBOARD VERSION:
JASPER DIP 7-8 ON ON
ZEPHYR DIP 7-8 OFF OFF <---- NEW
FALCON DIP 7-8 ON OFF

 

[[email protected]]

I changed DIP 7,8 to off, now with DIP3 on there is some progress, it passes POST 20, but stops on POST 2E. More suggestions ?

Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 14 - FSB_CONFIG_TX_CREDITS 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 14 - FSB_CONFIG_TX_CREDITS 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 14 - FSB_CONFIG_TX_CREDITS 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 2F - RELOCATE 
Post 2E - HWINIT

 

[DreamZ]

Ok now time to check your jtag qsb.

Its glitching but jtag isnt booting console..

Try dip 4 or dip 2 also.


Does it constantly stop at 2E?

 

[jsinger47]

1. Try different voltages
2. Try Falcon NAND/CB
3. Reflow the CPU

 

[[email protected]]

Ok now time to check your jtag qsb.

Its glitching but jtag isnt booting console..

Try dip 4 or dip 2 also.


Does it constantly stop at 2E?

Yes, 2E constantly
tried 2 and 4, but 3 is the best, it always passes up to 2E

Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 14 - FSB_CONFIG_TX_CREDITS 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 2F - RELOCATE 
Post 2E - HWINIT 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 14 - FSB_CONFIG_TX_CREDITS 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 2F - RELOCATE 
Post 2E - HWINIT 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 14 - FSB_CONFIG_TX_CREDITS 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 2F - RELOCATE 
Post 2E - HWINIT 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 80 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 14 - FSB_CONFIG_TX_CREDITS 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 2F - RELOCATE 
Post 2E - HWINIT 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 2F - RELOCATE 
Post 2E - HWINIT 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 14 - FSB_CONFIG_TX_CREDITS 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 2F - RELOCATE 
Post 2E - HWINIT 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 14 - FSB_CONFIG_TX_CREDITS 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 2F - RELOCATE 
Post 2E - HWINIT 
Post 18 - FETCH_CONTENTS 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 14 - FSB_CONFIG_TX_CREDITS 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 2F - RELOCATE 
Post 2E - HWINIT 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 14 - FSB_CONFIG_TX_CREDITS 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 2F - RELOCATE 
Post 2E - HWINIT 
Post 70 - INIT_VIDEO_DRIVER 
Post 01 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 14 - FSB_CONFIG_TX_CREDITS 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 2F - RELOCATE 
Post 2E - HWINIT 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 14 - FSB_CONFIG_TX_CREDITS 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 2F - RELOCATE 
Post 2E - HWINIT

 

[jsinger47]

Ok now time to check your jtag qsb.

Its glitching but jtag isnt booting console..

Try dip 4 or dip 2 also.


Does it constantly stop at 2E?

If the JTAG QSB was the issue, he'd get E79.

In other words, it isn't the JTAG QSB.

 

[[email protected]]

1. Try different voltages
2. Try Falcon NAND/CB
3. Reflow the CPU

1. with 1.2V rater shows too many errors and console shuts down with RRoD 0010. 1.8V is the same as default.
2. With Falcon file everything is exactly the same as with Zephyr
3. I reballed GPU on this console, stock nand boots and plays games perfectly.

 

[Sun_Lizard]

1. with 1.2V rater shows too many errors and console shuts down with RRoD 0010. 1.8V is the same as default.
2. With Falcon file everything is exactly the same as with Zephyr
3. I reballed GPU on this console, stock nand boots and plays games perfectly.

Similar issue as you but I can't get to 2E with my 4569_CB Zephyr. I have the best non-boot time with DIP 6. (it still doesn't boot but it takes longest to RROD with only DIP 6 on.)

I just tried 1.2 v /1.8 v switches. 1.2 is as bad as default, 1.8 is horrid.

Stock Nand boots just fine, which is good...

Yes, on R-JTAG 1.1 FW

 

[[email protected]]

Similar issue as you but I can't get to 2E with my 4569_CB Zephyr. I have the best non-boot time with DIP 6. (it still doesn't boot but it takes longest to RROD with only DIP 6 on.)

I just tried 1.2 v /1.8 v switches. 1.2 is as bad as default, 1.8 is horrid.

Stock Nand boots just fine, which is good...

Are you trying fw v1.1 ?
I don't have RRoD on default voltage. It just goes in cycles up to 2E indefinitely.

 

[jsinger47]

1. with 1.2V rater shows too many errors and console shuts down with RRoD 0010. 1.8V is the same as default.
2. With Falcon file everything is exactly the same as with Zephyr
3. I reballed GPU on this console, stock nand boots and plays games perfectly.

It doesn't matter what stock does.

Plus, i said reflow the CPU, not the GPU.

 

[[email protected]]

It doesn't matter what stock does.

Plus, i said reflow the CPU, not the GPU.

I don't believe that this will help, but if there is absolutely nothing else I can try I will definitely consider this option.

 

[jsinger47]

I don't believe that this will help, but if there is absolutely nothing else I can try I will definitely consider this option.