FIXED Ok, trying to install R-JTAG 1.1 on Zephyr

[AllyNerd]

Check ft6u4 and ft6u3

 

[[email protected]]

Check ft6u4 and ft6u3

OMG :facepalm:
Looks like I screwed up there.
I will check and fix it as soon as I get home.

 

[RF1911]

Well.. i told you...

 

[Oggy]

RFnoob1911

 

[[email protected]]

YES!!!
I officially confirm that R-JTAG works on Zephyr!!!
This Zephyr was RGH1 unglitchable, both CPU and GPU are reballed.

 

[jsinger47]

YES!!!
I officially confirm that R-JTAG works on Zephyr!!!
This Zephyr was RGH1 unglitchable, both CPU and GPU are reballed.

Because, you know, the word of several admins and moderators wasn't enough to confirm.

The issue with zephyrs is definitively the cpu for 2E fails.

I'm glad you got it working, but maybe take this a small lesson to take the advice of the nerds upstairs.

Ok, that probably sounds more derogatory that it was meant to. Rant over.

Great success!

In the case of a spelling error, I blame Tapatalk.

 

[jsinger47]

YES!!!
I officially confirm that R-JTAG works on Zephyr!!!
This Zephyr was RGH1 unglitchable, both CPU and GPU are reballed.

Also, it probably would have worked rgh1 with a reballed cpu, but that is merely speculation.

In the case of a spelling error, I blame Tapatalk.

 

[[email protected]]

Also, it probably would have worked rgh1 with a reballed cpu, but that is merely speculation.

In the case of a spelling error, I blame Tapatalk.

this is another Zephyr, I reballed both CPU and GPU long time ago on it and tried RGH1 then
first Zephyr is dead, I killed CPU on it trying to lift it

 

[jsinger47]

this is another Zephyr, I reballed both CPU and GPU long time ago on it and tried RGH1 then
first Zephyr is dead, I killed CPU on it trying to lift it

Ah, my mistake! Forget everything i just said.

 

[[email protected]]

It boots only with Falcon file (CB 5770), with Zephyr file - E79.Boot time is sporadic and looks like it's getting worse. At some point it started in 2 glitches, now it's up to 50. But when it starts it's stable.

Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 14 - FSB_CONFIG_TX_CREDITS 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 2F - RELOCATE 
Post 2E - HWINIT 
Post 33 - FETCH_CONTENTS_4BL_CD 
Post 34 - HMACSHA_COMPUTE_4BL_CD 
Post 35 - RC4_INITIALIZE_4BL_CD 
Post 36 - RC4_DECRYPT_4BL_CD 
Post 37 - SHA_COMPUTE_4BL_CD 
Post 3A - BRANCH 
Post 40 - Entrypoint of CD reached 
Post 42 - FETCH_HEADER 
Post 44 - FETCH_CONTENTS 
Post 45 - HMACSHA_COMPUTE 
Post 46 - RC4_INITIALIZE 
Post 47 - RC4_DECRYPT 
Post 48 - SHA_COMPUTE 
Post 4B - LZX_EXPAND 
Post 4E - FETCH_OFFSET_6BL_CF 
Post 4F - VERIFY_OFFSET_6BL_CF 
Post 51 - LOAD_UPDATE_2 
Post 50 - LOAD_UPDATE_1 
Post 52 - BRANCH 
Post 58 - INIT_HYPERVISOR 
Post 59 - INIT_SOC_MMIO 
Post 5A - INIT_XEX_TRAINING 
Post 60 - INIT_KERNEL 
Post 61 - INIT_HAL_PHASE_0 
Post 63 - INIT_KERNEL_DEBUGGER 
Post 64 - INIT_MEMORY_MANAGER 
Post 65 - INIT_STACKS 
Post 66 - INIT_OBJECT_SYSTEM 
Post 67 - INIT_PHASE1_THREAD 
Post 68 - Started phase 1 Initialization + INIT_PROCESSORS 
Post 69 - INIT_KEY_VAULT 
Post 6A - INIT_HAL_PHASE_1 
Post 6B - INIT_SFC_DRIVER 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 16 - FETCH_HEADER 
Post 18 - FETCH_CONTENTS 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 2F - RELOCATE 
Post 23 - INIT_SYSRAM 
Post 31 - FETCH_HEADER_4BL_CD 
Post 33 - FETCH_CONTENTS_4BL_CD 
Post 34 - HMACSHA_COMPUTE_4BL_CD 
Post 44 - FETCH_CONTENTS 
Post 45 - HMACSHA_COMPUTE 
Post 46 - RC4_INITIALIZE 
Post 48 - SHA_COMPUTE 
Post 4B - LZX_EXPAND 
Post 4D - DECODE_FUSES 
Post 4E - FETCH_OFFSET_6BL_CF 
Post 51 - LOAD_UPDATE_2 
Post 52 - BRANCH 
Post 59 - INIT_SOC_MMIO 
Post 5A - INIT_XEX_TRAINING 
Post 5B - INIT_KEYRING 
Post 5C - INIT_KEYS 
Post 5F 
Post 61 - INIT_HAL_PHASE_0 
Post 62 - INIT_PROCESS_OBJECTS 
Post 63 - INIT_KERNEL_DEBUGGER 
Post 64 - INIT_MEMORY_MANAGER 
Post 65 - INIT_STACKS 
Post 66 - INIT_OBJECT_SYSTEM 
Post 67 - INIT_PHASE1_THREAD 
Post 68 - Started phase 1 Initialization + INIT_PROCESSORS 
Post 69 - INIT_KEY_VAULT 
Post 6A - INIT_HAL_PHASE_1 
Post 6B - INIT_SFC_DRIVER 
Post 6C - INIT_SECURITY 
Post 6D - INIT_KEY_EX_VAULT 
Post 6E - INIT_SETTINGS 
Post 6F - INIT_POWER_MODE 
Post 70 - INIT_VIDEO_DRIVER 
Post 71 - INIT_AUDIO_DRIVER 
Post 72 - INIT_BOOT_ANIMATION + XMADecoder & XAudioRender Init 
Post 73 - INIT_SATA_DRIVER 
Post 75 - INIT_DUMP_SYSTEM 
Post 78 - INIT_STFS_DRIVER 
Post 79 - LOAD_XAM 
Most Fails(cumulative): 0x2E
Shutdown
Power Up
Waiting for POST to change
Post 79 - LOAD_XAM 
TIMEOUT or SMC CORRUPTED - Shutting Down
Most Fails(cumulative): 0x2E
Shutdown

 

[SoulReaper223]

sounds like the more times u try to glitch it in a row the more stress u are putting on the cpu and its taking longer to register the glitch

 

[Sun_Lizard]

@[email protected] - Which guide did you follow to rebuild your Nand with the Falcon image?

Since I don't have a local place I can get reball/reflow done the Falcon NAND is the only easy option, I'm afraid. I've searched for some good guides but w/o CPU key (it seems) it not a easy thing to do...

I intend to get into it this weekend... if I can find the time.

 

[[email protected]]

@[email protected] - Which guide did you follow to rebuild your Nand with the Falcon image?

Since I don't have a local place I can get reball/reflow done the Falcon NAND is the only easy option, I'm afraid. I've searched for some good guides but w/o CPU key (it seems) it not a easy thing to do...

I intend to get into it this weekend... if I can find the time.

What are you trying to achieve ?

 

[RF1911]

@[email protected] - Which guide did you follow to rebuild your Nand with the Falcon image?

Since I don't have a local place I can get reball/reflow done the Falcon NAND is the only easy option, I'm afraid. I've searched for some good guides but w/o CPU key (it seems) it not a easy thing to do...

I intend to get into it this weekend... if I can find the time.

To find a falcon nand u can just seek "falcon 9199 jtag freeboot eurasia" on google. You'll find an old 9199 freeboot from which u can create a rjtag xell loader.

 

[Ubergeek]

YES!!!
I officially confirm that R-JTAG works on Zephyr!!!
This Zephyr was RGH1 unglitchable, both CPU and GPU are reballed.

We told ya

Well done !

 

[Ubergeek]

@[email protected] - Which guide did you follow to rebuild your Nand with the Falcon image?

Since I don't have a local place I can get reball/reflow done the Falcon NAND is the only easy option, I'm afraid. I've searched for some good guides but w/o CPU key (it seems) it not a easy thing to do...

I intend to get into it this weekend... if I can find the time.

if your motherboard needs a reball/reflow then it doesn't matter what nand you use. A reflow means that the board is broken and needs to be repaired before it will work correctly.

 

[[email protected]]

HOT CPU


COLD CPU (first cycle was an instant boot because CPU didn't cool down from the previous experiment)

Do me a favor, before reballing, detach the fans, let it become a bit hot and see if it boots.

RF1911, exactly as you say!

If I insert a piece of paper between fan shroud and CPU heat sink and let CPU warm up it boots from the first glitch, without a paper up to 100 glitches (a lot worse than RGH2 on Falcon). Always fails on Post 2E. I already reballed the CPU on this board, and today I reflowed it just in case with Insat magic flux.

Any idea how to fix this ?

Stock image boots fine.

Initially when I just installed R-JTAG on this board there was too little thermal paste and CPU was too hot that's why it booted perfectly, then in FSD and dash launch I noticed that the temperature is too high, fans spin almost full speed but heat sink is almost cold. I fixed the problem by re-applying thermal paste, now temperature is good, but boot time sucks.

How can I fix this problem ?

This board was on 14699 recently, I tried RGH1 twice before reball and after reball, it never booted up even once.

 

[[email protected]]

Just try it.

It will tell you if the gpu/CPU will need a reball.

I had a jasper once stop at 2E everytime but when the system was warm. Say 45.Cish it would continue to boot consistantly.

Did you return it back to stock or found a solution ?