On the switch I want to get a new switch for it, where do I solder?

[XCRAZNMIKE]

can i get a description for the 1-8 wires on the switch so i can solder them to 4 switches.

 

[islander223]

pin # 1 is bank select (to select bank 1 connect this to pin# 4, to select bank 2 leave it disconnected)

pin # 2 is chip enable (to enable the chip connect this to pin# 4, to disable the chip leave it disconnected)

pin # 3 is flash protect (flash protect on when connected to pin# 4, flash protect off when disconnected)

pin # 4 is ground

pin # 5 is 5V in

pin # 6 is 5V out

pin # 7 is LAN LED

pin # 8 is HDD LED

 

[XCRAZNMIKE]

ty but which pins should i add together like pin 1 and 4 pin 3 and 8 ect (those are examples they prob dnt work)

 

[Fantmx]

What do you mean they didn't work? What type of switches did you use?

 

[XCRAZNMIKE]

im asking for a diagram of what wires i should use together, i was just giveing an example i didnt know if those were right or not

 

[XCRAZNMIKE]

but i assumed that 2 wires mached up but it seams i will have to use some weird pattern to get it to work correctly, can i just lead the switches to some rocker switches?

 

[Fantmx]

Big_Whoopin's post with everything you would ever need to know about the 2.6 switch

 

[XCRAZNMIKE]

THank you sorry i didnt search
ok cool it looks pretyt easy to throw together