once glitched ... not glitching anymore

[voldemrd]

hi

so i have this issue... i finnaly manahed to glitch my Falcon... i was even runing XexMenu ... but glitch board and all was out of case so i just wanted to get it together .. and when i was half way through i tried to boot xbox to ensure it still working .... and it wasnt

it just keep booting with no RROD and fan is making noises like vrrrrrrrrRRrrrrrrrrrrrrrRRrrrrrrrrrrrrrRRrrrrr (dont know how to describe it xD)

tried to flash original nand back .. with RROD so i rebooted Xbox and it booted normaly but when is cpld conected .. the fan is making the same noises ...until i unplug ground of cpld...then the noises stop and consloe boot up normaly.

anyone know why are those noises happening ?

thanks

 

[mespo365]

First, what is the secondary rrod code? Once its rrod'ing then click the eject and syc button at same time....repeat for times...this gives you a code based on how many lights show. If 4 lights shows its counted as 0. Example 4lights, 4lights, 2,2 whould be 0022 code.

Tell us this so we no what the error actually is. Also check to make sure you newly soldered wires arent disconnected/bad connection, shorting anythin out etc. Check to make sure you diddnt knick/knock off any components as well. Make sure you reinstalled the fan properly ...it may be rubbing which is making the noise.

 

[CapnSavaHoe]

Dumb question, but were there any wires near the fan when you were trying to put it back together? I ask because that noise you described happened to me once and when I looked [I run extra fans off the fan connector] it was one of the other fan's wires that came in contact with the main fan.

 

[bigO73]

Dumb question, but were there any wires near the fan when you were trying to put it back together? I ask because that noise you described happened to me once and when I looked [I run extra fans off the fan connector] it was one of the other fan's wires that came in contact with the main fan.

Love the screen name dude! Lol:biggrin:

 

[voldemrd]

those fan noises are caused by voltage peaks for sure ... and i checked for bad soldering and such at least 10x ... i cant resolder all wires because i had cpu_bypas solder point damaged and i had to replace whole rezistor and i made solid connection from that rezistor to cpld ...and stby_clock as well but that was long before i glitched it succesfully so it does not have any effect i think ..

ps: i cant tell you rrod code because it happened only once and not anymore and because i changed diodes from 2 colored to blue ones so i have only 1 diode soldered to original Red solder pad which signalize that something is wrtong

Edit: tried flash original nand again .. still working.. but what is happening for about a month is .. that console freezes randomly ... sometime at startup ... sometime during gameplay... but restart help everytime...

sry for my bad english