RGH One bad block when readin NAND, soldering inspection

[xaitra]

Hi,

I have just finished soldering on my QSB's for Phat Falcon.
When I red the NAND with NandPro I got:
"Error: 250 reading block 354"

In Flash Dump Tool under Bad Blocks I have:
"Note: Bad Block ID 0x0354 [Offset: 0x00DBA800]

-> Block ID 0x0354 found @ 0x3FF [Offset: 0x0107BE00]

===Analyzed successfully======================"

Followed FiB3R's glitch guide where he talks about bad blocks, if I understand him correctly I don't need to care about the bad block?
I did 4 dumps and everyone matches.

I also took some pictures of my soldering, does it seems to be okay or do I need to resolder some point?

Thanks in advance!

 

[aclark20]

Yes, as the bad block is not in the first 50 blocks, you do not need to remap. Just create your RGH NAND with XeBuild and use rawflash v4 and it will autoremap for you


Sent from my iPhone 4S using Tapatalk

Or follow Fib3rs guide with multibuilder / xenon.elf, it will also remap for you.

And wow, someone who actually figured out how to take decent pictures of their soldering. I think it looks good!

 

[keil423]

Soldering looks good. Dont worry about the bad block. Continue with RGH process and your bad block will be auto remaped.

 

[MightyShots]

doesnt 360 multi builder remap them for you anyway??

 

[Martin C]

it does, but you can elect for it not to.

 

[xaitra]

Ok, thx guys.

Forgot to order the NAND-X to CR cable so will practice some more soldering before taking on the tiny points on the other side.

But now I can relax as finishing the "first part" at least.