ANSWERED only reads games as dvd

Robwill6339

Noob Account
Jan 7, 2012
7
0
so i have: Laptop, x360usb pro, cks, external molex, jungle flasher 1.92. dashboard 14k ( dont know the whole number but its the new version)

i flashed the benq vad 6038 with LT 3.0, Lt 2.0, 1.91. each time going from stock to LT.
when im back to stock 360 plays games. after i flash it, 360 sees the game as a dvd. put a back up disk in console, game goes back to dashboard. if i return it to stock then game works. im guessing im flashing it wrong. i new at this so i have no idea. please help
 

RROD!

VIP Member
Apr 13, 2011
786
0
Are you auto loading lt+3.0 are you sure you used the right keys to flash as this is the type of error you get with wrong drive keys
 

syndicatetx

Full Member
Sep 9, 2011
25
0
LTPlus-0442-v3.0is the firmware you should be using, make sure you don't use LT-Benq-0800-v3, I was in a hurry and made this mistake when it got released!
 

Robwill6339

Noob Account
Jan 7, 2012
7
0
I have been using the open target because the auto has not worked.

ill download the firmware u suggested and try that.

all three times after i do the target then write it warns me that its not spoofing. is that a problem? what is spoofing and how should i do it if needed?
 

tere10

Noob Account
Dec 6, 2011
4
0
When you load FW to target press spoof bar in the middle after that start flash your drive ,one suggestion unzip you LT FW to Firmware folder in JF and your FW should be load automatically.
 

RROD!

VIP Member
Apr 13, 2011
786
0
Have you got the newest Cfw packs sounds like you using wrong Cfw .
 

Robwill6339

Noob Account
Jan 7, 2012
7
0
im using xusb360 v 18.1

a friend loaned me his burned disc so i could check to see if firmware works

---------- Post added at 01:32 ---------- Previous post was at 01:26 ----------

Firmware is: Stock
Key database updated


Loading MTK_Flash source file
Loading firmware file C:\Users\Williams\Desktop\Xbox360 rip\LTPlus-0442-v3.0.bin
MD5 hash: 8784e0f4ce27941a2a3293c8a5ac85e4
Genuine LT plus v3.0
Inquiry string found
Identify string found
Drive key @ 0xA020 FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PBDS VAD6038 0442]
Firmware is: LT-Plus 3.0

Getting Status from port 0x0000
SPi flash found with Status 0x73

Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................

Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !

Sending Vendor Outro to port 0x0000
Drive is Benq..

---------- Post added at 01:34 ---------- Previous post was at 01:32 ----------

your dvd key is correct?
how do i check that?
 

RickSizz

VIP Member
Nov 8, 2010
214
0
Standing in the rain
im using xusb360 v 18.1

a friend loaned me his burned disc so i could check to see if firmware works

---------- Post added at 01:32 ---------- Previous post was at 01:26 ----------

Firmware is: Stock
Key database updated


Loading MTK_Flash source file
Loading firmware file C:\Users\Williams\Desktop\Xbox360 rip\LTPlus-0442-v3.0.bin
MD5 hash: 8784e0f4ce27941a2a3293c8a5ac85e4
Genuine LT plus v3.0
Inquiry string found
Identify string found
Drive key @ 0xA020 FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PBDS VAD6038 0442]
Firmware is: LT-Plus 3.0

Getting Status from port 0x0000
SPi flash found with Status 0x73

Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................

Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !

Sending Vendor Outro to port 0x0000
Drive is Benq..

---------- Post added at 01:34 ---------- Previous post was at 01:32 ----------



how do i check that?
Judging by your log you flashed your drive with no key, you have to load the target firmware then click spoof source to target so that the key is matching in both the source and target fields. All "F's" is the dummy info on the custom firmware.

Source = Your drive key/firmware = stock firmware

Target = Your drive key and LT 3.0 = CFW custom firmware

Then flash the drive.
 
Last edited:
  • Like
Reactions: Robwill6339

Robwill6339

Noob Account
Jan 7, 2012
7
0
success sorta!! flashed it with LT plus.it played bioshock,but hardware failure when put backup of skyrim? i think its using 3.0.

---------- Post added at 01:45 ---------- Previous post was at 01:44 ----------

Judging by your log you flashed your drive with no key, you have to load the target firmware then click spoof source to target so that the key is matching in both the source and target fields. All F,s is the dummy info on the custom firmware.
yes i didnt spoof it.
 

ll4sheezy

VIP Member
Oct 8, 2010
267
0
Indiana, USA
Make sure you have the latest jungleflasher and the lastest cfw. Place the cfw in the firmware folder and it should load automatically after you read the firmware on your drive. If it doesn't load automatically remember to spoof and make sure your target DVD key matches your source DVD key. As far as the backup run it through the latest version of abgx. When you download the latest jungleflasher there is a folder in there labeled "Documentation". Read through that and follow it to the T. Its written well and easy to follow. There are also video and written tutorials in this forum. Just use the search to find them.


Sent from my iPad using Tapatalk HD
 
  • Like
Reactions: Robwill6339