Here is the deal, I had what I "thought" to be an Xecuter 3 BIOS. Instead, I just had FlashBIOS 3.03 on a disk. I flashed via disc to my 1 MB Bank, now I can not turn my xbox on that bank. The blue light on the switch bank stays on, but my xbox frags. Not knowing what was wrong, I tried a few other banks, now they won't turn on! Can somebody tell me if there is a way to reset my X3 back to factory settings? If so, will you tell me how?
Oops... I messed up big time! HELP
- Thread starter bubs3
- Start date
press both the power and eject button together.
The blue light on the switch bank should now be purple
The blue light on the switch bank should now be purple
?! Do you mean turn the 1MB on with 256K mode enabled or do this to unused BIOS?...baseballer87 said:
Same exact problem here... no luck so far.. my backup bios doesnt boot - get black screen - let me know if you figure something out plz
If you have an external switch .. enable the second switch by itself.. example
S1: off S2: on S3 off S4 off
or
S1: off S2: off S3 on S4 off
and it should load the Backup FlashBios 3.0.3 if you have the X3CE installed..
and the same works if you try the 3rd Switch enabled.. and the rest off... just another alternative to get into Flashbios if your Power+eject combo doesnt work..
S1: off S2: on S3 off S4 off
or
S1: off S2: off S3 on S4 off
and it should load the Backup FlashBios 3.0.3 if you have the X3CE installed..
and the same works if you try the 3rd Switch enabled.. and the rest off... just another alternative to get into Flashbios if your Power+eject combo doesnt work..
Last edited:
tried that - second combination gives me a steady blue light on the chip and blank screen it is not fragging either