opus cr4 + demon

Status
Not open for further replies.

john mathews

VIP Member
Jan 3, 2014
2,551
88
peoria illinois
got a problem got demon side of r-jtag+ booting great now heres the problem the stock nand acting like it glitching it seem like ecc is written on it but its not for it to be acting this way I have the retail nand flashed back same issue so I tried building a retail nand but ldv set at 34 but eror with jrunner and it make the image 32 any ideas( its not a soldering issue I believe its a ldv issue that jrunner wont let u bulid a 34 ldv image if someone wants to look at nand
 
Last edited:

nofeloniesyet

VIP Member
Jan 16, 2011
4,830
128
Nowhere
bud I know that problem is jrunner will not let u make a ldv 34 image point blank it erros out and change it to 32
extract all the needed files,and build img without nanddump.bin,enter 34 as ldv.you done this?

does same for me

***** WARNING: cfldv value 34 in options.ini is too large, setting to max value of 32

try autogg?
 
Last edited:

nofeloniesyet

VIP Member
Jan 16, 2011
4,830
128
Nowhere
yep funny thing is jrunner when u make image jrunner error then makes it 32 never seen this before
try opening options.ini in notepad,deselect dl files and file checks in jrunner try editing ini file to 34 in this line


if you provide a nanddump.bin with the correct ldv value, there is no reason to fill this in
; jtag and glitch2 images won't care what this value is set to, but retail images require this to match CPU fuses
; valid values are 1 - 32, leave blank to set to 0 for devkit images
cfldv =
 

john mathews

VIP Member
Jan 3, 2014
2,551
88
peoria illinois
try opening options.ini in notepad,deselect dl files and file checks in jrunner try editing ini file to 34 in this line


if you provide a nanddump.bin with the correct ldv value, there is no reason to fill this in
; jtag and glitch2 images won't care what this value is set to, but retail images require this to match CPU fuses
; valid values are 1 - 32, leave blank to set to 0 for devkit images
cfldv =
yep tried that no go jrunner only lets ldv go up 32 that's it ( I hope theres a work around to this that way anyone else runs into this they will know)
 
Last edited:

ablegepu

VIP Member
Jan 3, 2014
925
0
Alabama U.S
did you edit try editing the options.ini as nofelonies said in c:\program files\Jrunner\xebuild\Data\options.ini?
oops sorry skipped out on the directories a little there.
 
Last edited:

john mathews

VIP Member
Jan 3, 2014
2,551
88
peoria illinois
I think this xbox is cursed or got a ghost now its booting stock dash lol idk or could it be a cpu issue ok now if I let it sit and switch to stock it red ring right away now if I switch to demon and hurry up n switch to stock it boots stock wtf is up is what can I check also its not in case its just the board and fan im wondering could the ground not being grounded to the nand switch cause this
 
Last edited:

jligg

VIP Member
Mar 16, 2011
1,062
88
Cincinnati Ohio
I think this xbox is cursed or got a ghost now its booting stock dash lol idk or could it be a cpu issue ok now if I let it sit and switch to stock it red ring right away now if I switch to demon and hurry up n switch to stock it boots stock wtf is up is what can I check also its not in case its just the board and fan im wondering could the ground not being grounded to the nand switch cause this
I told you that you shouldn't be working on peoples consoles. Should have took my advice
 
  • Like
Reactions: playingmax
Status
Not open for further replies.