orange and green flash while flashing

[athlonxp]

Hi there when im trying to flash me bios i get the screen saying flashing but it doesn't erease the bios it just stopped and i have a green and orange flashes going on.
what could it be i have checked my soldering and its fine what elles could it be.
when i boot to backup it starts and shuts off straight and way then boots to main flash screen.

 

[nartac]

green and orange flash usually indicates video problem. I can't really honestly tell you why in your case but make sure to use the stock (composite) a/v cable. What bios are you flashing and what switches settings? What xbox version do you have also would help.

 

[DemonSlayer]

bad

you need to use the X3 bios because you tried to flash with a bios too small but still 256,512,ot the other. You need to select the right bank for the size.
I did this to and just got the X3 bios and reflashed it useing the backup bios.
Using the right bank.

 

[athlonxp]

Im trying to flash the 1959 Bios to the chip on a 1.5 bios. i only use the c/p video cable becuase i only have it om my tv.

the dip switches on the fron are set to all of but i was set to 1and 2 on and the rest off.
dunno what elles to do.

 

[nartac]

make sure to use bios for version 1.5 xbox (X3_1959.bin). If you did, try flashing to banks 5678 (off on off off off) and see if it flashes correctly. if that didn't work, try disconnecting your x3 control panel cable from your x3 chip. If still no go, I would definitely consider resoldering again.

 

[athlonxp]

i think i tryed that bank ill try with the pannel dissconected but the strange thing is. when it starts to flash it hangs untill i hit the off button then it starts to erease.
iv resolder already think it was the problem.

I have the x3-1959 bios and tryed flashing by dvd and network both do the same

 

[nartac]

if you have tried all of that, I still say to redo your soldering despite you think you did a good job. I seriously don't think it's the chip. If you know someone with modded xbox, you can try to flash it from that xbox to see if the problem is with the chip. I still bet my money on the soldering.

 

[athlonxp]

i dunno how it can be my soldering the chip is running just wont flash.

Witch pins will cause it now to run propley

 

[athlonxp]

redone me soldering same thing happens

all im getting it this
Im not getting the yellow bar and the leds on the fron are blinking green and orange
I think me chip is faulty