Hey guys im new here, and just have a couple of questions.
I have an original xbox with the xecuter smartxx v2 v1.6. I had,it stored in our attic thinking I wasnt going to use it anymore. I took it out and opened it up started to clean it up. I didnt realiezed I had pulled off the DO cable from the chip. I soldered it back and put ecerything back. When I plugged it in I look at the side of the xbox to see if the led will turn on red when I turned it on and it did. It boot it, but when I tried to play splinter cell. It didnt boot it up and the screen just stayed black. When I turned off the xbox and turned on the xbox the led indicator or ROL cycled red,orange,green and turned off and turned back on doing the samething then it stayed on doing the ROL cycle making it look like it was on. When I check on the side of the xbox the chip has both blue and red light on.
Whas this caused of something I did or how can I troubleshoot this problem.
Thanks
I have an original xbox with the xecuter smartxx v2 v1.6. I had,it stored in our attic thinking I wasnt going to use it anymore. I took it out and opened it up started to clean it up. I didnt realiezed I had pulled off the DO cable from the chip. I soldered it back and put ecerything back. When I plugged it in I look at the side of the xbox to see if the led will turn on red when I turned it on and it did. It boot it, but when I tried to play splinter cell. It didnt boot it up and the screen just stayed black. When I turned off the xbox and turned on the xbox the led indicator or ROL cycled red,orange,green and turned off and turned back on doing the samething then it stayed on doing the ROL cycle making it look like it was on. When I check on the side of the xbox the chip has both blue and red light on.
Whas this caused of something I did or how can I troubleshoot this problem.
Thanks
Last edited: