LITEON DG-16D4S - SLIM PCB change problem green light flashing.

[syswind]

Hello!
I changed the pcb on my slim drive, with another slim drive pcb.
I flashed into my original dummy.bin files but when i power on my xbox the green light flashing middle of the power button.
The drive opening and closeing well but not moving the laser head.
What is the problem.
I reflashed this pcb 3-4 times but same result.

Any idea? :frown:

 

[hersheys247]

Are both these PCB post-13146 dash?
How are you unlocking PCB to flash.?
Are you locking PCB back when done?
Sounds also like you May have shorted the tray_status hence why yout getting blinking green. Have you checked the voltage on that?



Sent from my brain tumor causing device using Tapatalk.
Please give THANKS and REP+1 if someone helped you

 

[syswind]

That PCB what i got, is unlocked by kamikaze hack.(0x00)
After flash this pcb with my original dummy.bin file i locked it.
Tha dashboard 2.0.14719 now.

 

[Martin C]

So you didn't get a replacement PCB so to speak - you drilled an existing one.

Get a T-X replacement PCB and you will receive support.